Gun Stands

shooter4life · 06-17-2012, 12:31 PM

Here is a raw version of a gun stand I put together this week...the holes have rubber around them to protect the barrel- lexan. Awe plate that. An be cut into a variety of patterns. Let me know what you think:

kingJurzy · 06-17-2012, 01:10 PM

Looks great

blackrain · 06-17-2012, 01:16 PM

That is nice and very simple. Looks like any marker can be used with this. AWESOME work.

Later,
Blackrain

shooter4life · 06-17-2012, 10:04 PM

I am thinking of marketing them....what do you think you would pay for one if it was in its finished state minus being epoxied (it being supplied in a 2 ton mix tube dispenser)

kingJurzy · 06-17-2012, 10:19 PM

I would like to test one out for free

Modded-Like-Hell · 06-17-2012, 10:32 PM

cool!

what holds the base?

blackrain · 06-17-2012, 10:36 PM

Quote:

Originally Posted by shooter4life

I am thinking of marketing them....what do you think you would pay for one if it was in its finished state minus being epoxied (it being supplied in a 2 ton mix tube dispenser)

Personally I like it the way it is. Simple. I would epoxy a solid piece in the PVC tube and then screw in the base with counter sunk screws in the bottom of the base. Maybe helicoil them in. A little hydrographing would make them look real nice.

If you want me to review it let me know. I'll add it to the others I'll be releasing in about two weeks.

Later,
Blackrain

shooter4life · 06-18-2012, 09:17 PM

The lexan is what the tube is attached to using a 2 ton epoxy mix (I have about 100 packages of the stuff). I got a craving for waves so I broke out the powerhouse bench grinder. I really think with a bigger base they could hold a gun and a tank but it would have to be a peanut. Ill post a shot with it painted and the base left clear when the weather permits...stupid rain sets me back on this project again.

blackrain · 06-18-2012, 11:52 PM

Forget the paint have that sucker hydrographed

I know it would be expensive maybe, but flames would make it look real cool

However leaving the base white is a great idea. Let the customer choose what color they want when they paint it themselves. Cuts cost and lowers cost at the same time

Later,
Blackrain

jptheripper · 06-19-2012, 11:12 PM

If you fill the pipe below the opening with like sand/lead shot you could propbably get away with either a smaller diameter/smaller base.

06-17-2012, 12:31 PM	#1 (permalink)
shooter4life Active Member Join Date: Jan 2011 Location: MA	Gun Stands Here is a raw version of a gun stand I put together this week...the holes have rubber around them to protect the barrel- lexan. Awe plate that. An be cut into a variety of patterns. Let me know what you think:

06-17-2012, 01:16 PM	#3 (permalink)
blackrain MCB Member Join Date: Apr 2006 Location: America	That is nice and very simple. Looks like any marker can be used with this. AWESOME work. Later, Blackrain __________________ Visit my Sponsor page: http://www.mcarterbrown.com/forums/t...y-sponsor.html "When all else fails, pull the pin and see what happens next" Follow Team Blackrain on Face Book: http://www.facebook.com/#!/profile.p...00000734844527 Best Auto cocker info ever Just like to make crazy stuff for paintball? Click here My feedback How Paintballs are made

06-17-2012, 10:32 PM	#6 (permalink)
Modded-Like-Hell adult film watcher Join Date: Apr 2009 Location: New York	cool! what holds the base? __________________ Santa's Good List 65+ MCB feedback 100+ Customcockers feedback (old system) 75+ Customcockers feedback (new system) 20+ PBN feedback

06-18-2012, 11:52 PM	#9 (permalink)
blackrain MCB Member Join Date: Apr 2006 Location: America	Forget the paint have that sucker hydrographed I know it would be expensive maybe, but flames would make it look real cool However leaving the base white is a great idea. Let the customer choose what color they want when they paint it themselves. Cuts cost and lowers cost at the same time Later, Blackrain __________________ Visit my Sponsor page: http://www.mcarterbrown.com/forums/t...y-sponsor.html "When all else fails, pull the pin and see what happens next" Follow Team Blackrain on Face Book: http://www.facebook.com/#!/profile.p...00000734844527 Best Auto cocker info ever Just like to make crazy stuff for paintball? Click here My feedback How Paintballs are made

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-17-2012, 01:10 PM	#2 (permalink)
kingJurzy Rec Poster Join Date: Jun 2012	Looks great

06-17-2012, 10:04 PM	#4 (permalink)
shooter4life Active Member Join Date: Jan 2011 Location: MA	I am thinking of marketing them....what do you think you would pay for one if it was in its finished state minus being epoxied (it being supplied in a 2 ton mix tube dispenser)

06-17-2012, 10:19 PM	#5 (permalink)
kingJurzy Rec Poster Join Date: Jun 2012	I would like to test one out for free

06-18-2012, 09:17 PM	#8 (permalink)
shooter4life Active Member Join Date: Jan 2011 Location: MA	The lexan is what the tube is attached to using a 2 ton epoxy mix (I have about 100 packages of the stuff). I got a craving for waves so I broke out the powerhouse bench grinder. I really think with a bigger base they could hold a gun and a tank but it would have to be a peanut. Ill post a shot with it painted and the base left clear when the weather permits...stupid rain sets me back on this project again.

06-19-2012, 11:12 PM	#10 (permalink)
jptheripper Angel Collector Join Date: Aug 2011 Location: North Port, FL	If you fill the pipe below the opening with like sand/lead shot you could propbably get away with either a smaller diameter/smaller base.