| ||Thread Tools||Search this Thread|
|01-07-2013, 02:47 PM||#1 (permalink)|
Join Date: Nov 2009
help whit lcd
got this angel lcd yesterday, it had been in a basement for several years and looks kinda water damaged. clead most off it, and need some help take it apart. tried the manual but i dont realy help
what year and model it is?
how do i get out the hammer and valve?
as i understand i need a M3 screw to get the lpr out, is it just pull it out?
and looks like the breech rod are rusted stuck and the knob are snapped off, any idea i can get it out?
|01-07-2013, 05:38 PM||#2 (permalink)|
Join Date: Aug 2011
Location: North Port, FL
it comes out the other side
take the plug out, then you can either push it from the back with a squeege, or you have to thread a m2.5 screw into the plunger and pull, and then use a pick to gently pull it out.
Make sure the retaining pins are removed from the bottom.
And its a 2002 Fly LCD. Other than that one whammy looks in pretty good shape.
|01-08-2013, 07:15 PM||#5 (permalink)|
Join Date: Dec 2006
That's the piece that goes behind the bolt on the main body to plug up the solenoid area
|Thread Tools||Search this Thread|