mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   WDP (http://www.mcarterbrown.com/forums/wdp/)
-   -   Led trigger adjustment (http://www.mcarterbrown.com/forums/wdp/223378-led-trigger-adjustment.html)

ogti9g9 01-12-2013 11:51 PM

Led trigger adjustment
 
Is this possible?

I just got a dark angel led and it hits the micro switch right as the trigger hits the metal arcs behind the trigger, and I would like to move it forward a little.

howdy 01-13-2013 11:48 AM

U gotta take the frame off the marker and the trigger will either have two adjustments or one adjustment via Allen set screws. Haven't tinkered with adjustments in awhile so you will just have to play with them and it will eventually get where u want it.

ogti9g9 01-13-2013 05:49 PM

Ah, alright, thanks!

RedHairedTrev 01-15-2013 01:42 AM

It might be a good idea to just take the whole trigger out to clean it. All you have to do is punch out the pin (without missing and scratching the frame). Cleaning off the side of the trigger, the inside of the frame, and the pin will really make the trigger butter smooth. If done properly, there will be minimal resistance and you won't have to put the trigger spring back in.

gainman 01-19-2013 04:26 PM

you can bend the leaf on the switch


All times are GMT -4. The time now is 01:56 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC