mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 04-24-2013, 07:29 PM   #21 (permalink)
playing with old toys
 
kevdupuis's Avatar
 
Join Date: Jun 2010
Location: in a second hand set of dimensions

Quote:
Originally Posted by big jim View Post
I tried that first. Had quite a bit of trouble getting the wiring small enough to fit in the tube with the batteries. Figured there had to be a better way.
What I did was use the flat wire from the original battery pack to get around the new batteries with a thin piece of electrical tape for insulation.
__________________
Canadian Contingent #CC140
kevdupuis is offline   Reply With Quote
Old 04-27-2013, 08:20 AM   #22 (permalink)
Active Member
 
shooter4life's Avatar
 
Join Date: Jan 2011
Location: MA

My virtued led will be complete today or tomorrow. No frame hackery, no shenanigans. Virtue pmr7 rail board. Sickest conversion I've done considering the lcds are a walk in the park.
shooter4life is offline   Reply With Quote
Old 04-28-2013, 12:51 PM   #23 (permalink)
MCB Member
 
big jim's Avatar
 
Join Date: Sep 2006
Location: Holdrege Nebraska

Quote:
Originally Posted by shooter4life View Post
My virtued led will be complete today or tomorrow. No frame hackery, no shenanigans. Virtue pmr7 rail board. Sickest conversion I've done considering the lcds are a walk in the park.


I would like to see this as just did a brief look at the frame of my led and there was no way a 9V would fit in there even without the board. Now if the battery is fastened to the drop forward, I can see that.
__________________
Big Jim

Quote:
Originally Posted by Mr. Furious View Post
You'll have a tough time finding a nicer group of people on the internet(even if our opinions all suck).

Quote:
Originally Posted by Vitalsilence View Post
I've dealt with canadians several times and I usually undercharge by 2-5 dollars cause I feel bad for them sometimes. Just my 2cents.

feedback http://www.mcarterbrown.com/forums/f...k-big-jim.html
big jim is offline   Reply With Quote
Old 04-28-2013, 03:41 PM   #24 (permalink)
Active Member
 
shooter4life's Avatar
 
Join Date: Jan 2011
Location: MA




There ya go boss- I did not modify the frame one bit except to relocate the on off power buttons- there are two buttons on a virtue rail, one turns it on one turns off the eyes so it'll shoot faster in whichever mode you choose.



Text 978/530/6747 if you want more info.
shooter4life is offline   Reply With Quote
Old 04-29-2013, 09:29 AM   #25 (permalink)
MCB Member
 
big jim's Avatar
 
Join Date: Sep 2006
Location: Holdrege Nebraska

But where does the battery go? Or are you using the camera batteries? The 9V didn't fit in my frame when I was sizing things up?
The board does look good in there. That should be an easy install.
__________________
Big Jim

Quote:
Originally Posted by Mr. Furious View Post
You'll have a tough time finding a nicer group of people on the internet(even if our opinions all suck).

Quote:
Originally Posted by Vitalsilence View Post
I've dealt with canadians several times and I usually undercharge by 2-5 dollars cause I feel bad for them sometimes. Just my 2cents.

feedback http://www.mcarterbrown.com/forums/f...k-big-jim.html
big jim is offline   Reply With Quote
Old 04-29-2013, 10:18 AM   #26 (permalink)
Active Member
 
shooter4life's Avatar
 
Join Date: Jan 2011
Location: MA

There are diff. Size 9 volts. Ill post a pic later of my frame for ya. Also this install is done. Just waiting on a few bits then it will be tested an auctioned off.
shooter4life is offline   Reply With Quote
Old 04-29-2013, 01:18 PM   #27 (permalink)
Active Member
 
shooter4life's Avatar
 
Join Date: Jan 2011
Location: MA




That's the squarest biggest 9 bolt made . As you can see the wires fit between it and the inside of the frame. I also used a hard topped connector to show there's space for hard or soft topped.
shooter4life is offline   Reply With Quote
Old 05-01-2013, 02:49 PM   #28 (permalink)
MCB Member
 
big jim's Avatar
 
Join Date: Sep 2006
Location: Holdrege Nebraska

Looks very good. My PMR board arrived yesterday If I hadn't already sold my LED I would have to try fitting a battery in again. Guess I'll just have to wait and see if I pick up another LED some time.
__________________
Big Jim

Quote:
Originally Posted by Mr. Furious View Post
You'll have a tough time finding a nicer group of people on the internet(even if our opinions all suck).

Quote:
Originally Posted by Vitalsilence View Post
I've dealt with canadians several times and I usually undercharge by 2-5 dollars cause I feel bad for them sometimes. Just my 2cents.

feedback http://www.mcarterbrown.com/forums/f...k-big-jim.html
big jim is offline   Reply With Quote
Old 05-04-2013, 09:26 PM   #29 (permalink)
MCB Member
 
Jaccen's Avatar
 
Join Date: Aug 2011
Location: SW Ontario

AKA Fan
Ah! Glad I found this thread. Very nice install.
__________________
MCB Feedback
Please ship to me using US Postal Service when shipping to Canada.
Don't ship to Canada? No worries--I can work it out with you: US Parcel Pickup

Jaccen is offline   Reply With Quote
Old 05-04-2013, 11:31 PM   #30 (permalink)
Active Member
 
shooter4life's Avatar
 
Join Date: Jan 2011
Location: MA

I sold my led- on it's way to Michigan.
shooter4life is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » WDP

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 10:47 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC