| ||Thread Tools||Search this Thread|
|04-04-2014, 11:28 PM||#1 (permalink)|
Join Date: Apr 2014
LCD angel mod
I have and lcd angel that was aced, it's been dead for some time, battery is good but won't take a charge. The battery and charger worked on other lcds. I had taken it to an angel tech at the time but...... Like to get it up and running after reading about the mods that can be done. I would like to use a 9V and I don't need it to shoot any faster than 15 bps max, but would like the bps to be adjustable if possible. would like to keep the eyes working if possible. Looking for feed back on which ones I can do with out sending it out. I will ship it as a last resort if it means the eyes will work.
Thank for the help.
|04-05-2014, 12:08 AM||#2 (permalink)|
Sic Itur Ad Astra
if the battery won't take a charge that means some connector on the board is shot or at least it would seem that's the case. If it were me I'd send it to east coast angel and have him do a PMR board swap. Not sure if the eyes will still work but end of the day with a modern FF loader and if you don't need to shoot faster than 15 max you'll be fine flying blind anyways.
|04-06-2014, 05:53 PM||#3 (permalink)|
Join Date: Oct 2013
Shoot me a text boss- 978/530/6747
Well get it fixed
|Thread Tools||Search this Thread|