mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 10-14-2008, 02:13 AM   #1 (permalink)
Post Whore
 
howdy's Avatar
 
Join Date: Dec 2006

LCD Noid venting/ leaking??

Hello,

I was testing out my ironman and i noticed a very small venting nose coming from the noid area. I thought it could be venting because of too much pressure so i lowered the inline all the way down and slowly raised it to volocity. It didnt vent until i got it around 275fps. I ended up taking the noid out and apart and re-lubed it. All the seals and o-rings were good. Put it back together and it is still doing it, a tad bit worse. Could it be the gasket between the body and the noid or is my noid bad? ANy help would be great.

Thanks
-Mike
__________________
LF94Evolution CustomFreeflowFulcrum RF94BradNestle CamoEclipseMag RF98Sniper CamoSmartmag IronmanDyeLCD ElectricSkysEclipseLED FoldaMagicF1
Feedback
McarterBrown
CustomCockers
Pbnation
Ebay
howdy is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » WDP

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 11:19 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC