| ||Thread Tools||Search this Thread|
|03-02-2007, 02:25 AM||#1 (permalink)|
Problem with WGP Stock Inline Reg
I have it installed on my Spyder, and whenever I screw in a CO2 tank it would leak out of the pressure release hole on the reg.
how can I fix this?
Secondly, how can I lower input pressure from the reg? I'm running the Spyder with a LP AKA valve and it cannot handle high pressure.
|03-03-2007, 10:16 AM||#2 (permalink)|
Join Date: Oct 2006
Location: Syracuse, NY
First, your reg probably needs to be rebuilt, but possibly just lubed well. Something inside is not forming a seal correctly.
Second, to lower the output, unscrew the bottom cap and turn the screw counter clockwise. You obviously cannot do this while the gun is aired up.
And finally, to encourage seal life, I highly recommend anti-siphoning your tank if you have not done so already.
Proud to be sponsored by The Underground Mod Shop
|Thread Tools||Search this Thread|