autococker sniper question

Swiftbear · 06-01-2010, 02:18 PM

I recently purchased a few pre 2K autococker bodies. What I can't figure out is where does the IVG go? There seems to be no threading for the IVG to keep the hammer spring in. Am I missing something here? I tried to find some sniper manuals with no luck. Any help would be appreciated...

xero28 · 06-01-2010, 02:32 PM

Older bodies didn't have threaded IVG's. They used a different type of velocity adjustment. I don't have one, so I'm not sure what to use, but I just know that they were different. There are people who can thread it to take an IVG though.

Swiftbear · 06-01-2010, 02:53 PM

Ah I see, thank you. Can some one possible post a picture of one.

Swiftbear · 06-01-2010, 03:24 PM

Or does anyone know what to call the velocity adjustment that goes on a pre 2K autococker body? I will post a WTB for one.

THE-SHOOTIST · 06-01-2010, 03:29 PM

Take out the cocking rod, insert a 1/4" allen key, rotate key to right to increase velocity, re-insert cocking rod.
To access the hammerway:
Remove grip frame
Remove cocking rod
Remove backblock
Remove flat-head allen screw that retains the hammerway plug

Everything should slide right out.

Swiftbear · 06-01-2010, 07:08 PM

Quote:

Originally Posted by THE-SHOOTIST

Take out the cocking rod, insert a 1/4" allen key, rotate key to right to increase velocity, re-insert cocking rod.
To access the hammerway:
Remove grip frame
Remove cocking rod
Remove backblock
Remove flat-head allen screw that retains the hammerway plug

Everything should slide right out.

I know how to adjust the velocity. The problem I am having is the pre 2K bodies do not have the threading for an IVG that you use to adjust the velocity.
I want to know what the piece looks like or what is it called, that holds the hammer spring in.

pump · 06-02-2010, 07:16 AM

search for Nelson Hammer Kit for Snipers or AutoCockers

Ravi is your guru

Sinisterways90 · 06-06-2010, 12:22 PM

belsales wormdrive should work as well.

Jordan · 06-06-2010, 07:02 PM

Quote:

Originally Posted by Swiftbear

I know how to adjust the velocity. The problem I am having is the pre 2K bodies do not have the threading for an IVG that you use to adjust the velocity.
I want to know what the piece looks like or what is it called, that holds the hammer spring in.

I think it's called an adjuster sleeve. There are some currently for sale on this site - have a look for anyone selling Cocker parts.

I used to have an older Cocker with that setup - I found a sleeve that was compatible with Nelson springs that made my life a lot easier when it came to tuning.

ncbbh88 · 06-06-2010, 10:50 PM

Quote:

Originally Posted by Sinisterways90

belsales wormdrive should work as well.

?? same as a rex dialer?

Nc

06-01-2010, 02:18 PM	#1 (permalink)
Swiftbear MCB Addict Join Date: Feb 2009 Location: North Shore Vancouver, BC	autococker sniper question I recently purchased a few pre 2K autococker bodies. What I can't figure out is where does the IVG go? There seems to be no threading for the IVG to keep the hammer spring in. Am I missing something here? I tried to find some sniper manuals with no luck. Any help would be appreciated... __________________ Swiftbear's Feedback http://www.mcarterbrown.com/forums/f...tml#post780544 "Gas, Grass, or BRASS, nobody rides for free!" "Russc taught me everything I know"

06-01-2010, 02:32 PM	#2 (permalink)
xero28 Seasoned Member Join Date: Oct 2008	Older bodies didn't have threaded IVG's. They used a different type of velocity adjustment. I don't have one, so I'm not sure what to use, but I just know that they were different. There are people who can thread it to take an IVG though. __________________ MCB Feedback CC Feedback AO Feedback PBN Feedback

06-01-2010, 02:53 PM	#3 (permalink)
Swiftbear MCB Addict Join Date: Feb 2009 Location: North Shore Vancouver, BC	Ah I see, thank you. Can some one possible post a picture of one. __________________ Swiftbear's Feedback http://www.mcarterbrown.com/forums/f...tml#post780544 "Gas, Grass, or BRASS, nobody rides for free!" "Russc taught me everything I know"

06-01-2010, 03:24 PM	#4 (permalink)
Swiftbear MCB Addict Join Date: Feb 2009 Location: North Shore Vancouver, BC	Or does anyone know what to call the velocity adjustment that goes on a pre 2K autococker body? I will post a WTB for one. __________________ Swiftbear's Feedback http://www.mcarterbrown.com/forums/f...tml#post780544 "Gas, Grass, or BRASS, nobody rides for free!" "Russc taught me everything I know"

06-02-2010, 07:16 AM	#7 (permalink)
pump Post Whore Join Date: Aug 2006 Location: under Kapiolani on ramp	search for Nelson Hammer Kit for Snipers or AutoCockers Ravi is your guru __________________ Hawaiipb.com Autotriggers For Sale

06-01-2010, 03:29 PM	#5 (permalink)
THE-SHOOTIST MCB Member Join Date: Apr 2006 Location: Saugus MA	Take out the cocking rod, insert a 1/4" allen key, rotate key to right to increase velocity, re-insert cocking rod. To access the hammerway: Remove grip frame Remove cocking rod Remove backblock Remove flat-head allen screw that retains the hammerway plug Everything should slide right out.

06-06-2010, 12:22 PM	#8 (permalink)
Sinisterways90 Active Member Join Date: Sep 2009 Location: Peoria, IL	belsales wormdrive should work as well.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search