mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 04-16-2007, 12:03 PM   #1 (permalink)
MCB Member
 
lonegunmen's Avatar
 
Join Date: Apr 2006
Location: Southwestern Ontario

ROCK Regulator Leaking

So my PPS Rock Regulator is leaking out of the relief hole.
The manual sez I have to readjust the set screw ,as this is a relief valve.
But nothings changed for other settings.
Would it also leak out of this hole if an o-ring failed in it?
I've had this marker in the same setup for 4 years now with absolutely no problems...
Thanks,lonegunmen
__________________
Fear leads to Anger,
Anger leads to Hate,
Hate leads to Suffering...

My Feedback
lonegunmen is offline   Reply With Quote
Old 04-16-2007, 03:36 PM   #2 (permalink)
MCB Member
 
sdawg's Avatar
 
Join Date: Dec 2006
Location: Texas

Quote:
Originally Posted by lonegunmen View Post
So my PPS Rock Regulator is leaking out of the relief hole.
Would it also leak out of this hole if an o-ring failed in it?
I belive that is the most likely cause of this problem.
__________________
Everybody: Let's ease up on the red loctite, 'kay? Thanks.

MCB Feedback
sdawg is offline   Reply With Quote
Old 04-16-2007, 04:15 PM   #3 (permalink)
Post Whore
 
Cunha's Avatar
 
Join Date: Apr 2006
Location: Monterey, CA
Send a message via AIM to Cunha Send a message via MSN to Cunha Send a message via Yahoo to Cunha

Rock regs dont leak. It must not be a rock.


Just kidding. It will leak from there if an O ring is bad, yes.
__________________
"I'll see it when I believe it"
Cunha is offline   Reply With Quote
Old 04-16-2007, 04:34 PM   #4 (permalink)
Passing through rider
 
Azzy's Avatar
 
Join Date: Mar 2006
Location: Finleyville, PA

Fan of EMR
Brass N Wood Fan
Quote:
Originally Posted by Cunha View Post
Rock regs dont leak.



Either the piston o-ring or the seat. Most likley the o-ring. You should be able to get a new one at a hardware store.
__________________
Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6
www.AzzysDesignWorks.com - best replacement jeep gauges in the biz
Old Timer Feedback
Azzy is offline   Reply With Quote
Old 04-17-2007, 09:47 AM   #5 (permalink)
MCB Member
 
lonegunmen's Avatar
 
Join Date: Apr 2006
Location: Southwestern Ontario

Ok, Thanks everyone.
I'll be tearing it apart this week to replace that o-ring then.
__________________
Fear leads to Anger,
Anger leads to Hate,
Hate leads to Suffering...

My Feedback
lonegunmen is offline   Reply With Quote
Old 04-23-2007, 01:55 PM   #6 (permalink)
MCB Member
 
lonegunmen's Avatar
 
Join Date: Apr 2006
Location: Southwestern Ontario

So on friday I remove the reg fom the gun and think to myself, "Now that its off the 'gun, how do I take it apart?"
So I unscrew the adjuster screw on the front, think to myself,"Geez that seems loose."
And go about looking for some way to dissassemble it.
I find none, put it back on, put the screw back in,oil and air it up, and it works fine!!!
D'oh!
Now to just fix the leak coming out the barrel...
Do you have any idea how hard it is to find a spring kit or complete rebuild kit for an autococker in Canada?!?!?!
My gawd man!

Thanks all for your help on the previous problem.
lonegunmen
__________________
Fear leads to Anger,
Anger leads to Hate,
Hate leads to Suffering...

My Feedback
lonegunmen is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » WGP

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 11:16 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC