| ||Thread Tools||Search this Thread|
|06-22-2007, 03:33 PM||#1 (permalink)|
Join Date: Jun 2007
Location: St. Louis
Hey guys I've been searching for both forum posts here on MCB and websites on the internet that cover modifying the slider trigger frame. Things such as polishing the sear, adding trigger stops, etc. Is there a website or a post on here that covers these different mods?
|06-22-2007, 04:08 PM||#2 (permalink)|
Join Date: Apr 2006
Location: Vancouver, BC
Here's a good article on sliders.
Making a 1.5 mm Trigger pull on a Slider - Custom Cockers Forum
First of all, what frame are you using? It makes a difference in what you can do.
|06-22-2007, 05:11 PM||#4 (permalink)|
Join Date: Mar 2006
Location: Lynn, Ma
polishing a hardened sear you will need a set of oil stones ( machinests use theses for finish) Most of the stuff is straight ahead common mechanical ther never has been much on how too's.
|06-23-2007, 09:17 PM||#5 (permalink)|
Join Date: Oct 2006
If you're making a sniper then all you need is a travel stop and perhaps polish the ramp on the trigger plate and the rubbing point of the sear if it's needed. MOst of the time these surfaces are already quite smooth and polished. A spot that isn't often thought about is point of the sear and the end of the hammer lug. Those should also be polished to a mirror shine and the corner of the hammer lug slightly rounded over by this polishing.
A set of oil or water stones will do a lovely job of the inititial polishing and if you have an 8000 grit water stone then it'll leave a mirror like finish. Otherwise an oil stone and then finish with 600 wet or dry used with a bit of oil then work up to 1000 grit and then the BACK of the 1000 grit paper (it is quite abrasive but smoother than the front) and finish it with some mag wheel or chrome polish used on some file card like paper. By this time you should be able to easily see your reflection in the surface or sear and lug ends.
I had a "Paintball God" moment once.
Like Al Bundy's Polk High football moment I live on
for the slim chance of repeating that one time
miracle in some small way.........
|06-26-2007, 01:34 AM||#6 (permalink)|
is the frame plastic or metal??? if its plastic i would avoid it at all costs,and scratch up some cashola and buy anything else(as long as it isnt plastic/composit material) literally any thing!
the only thing permanent in this world is change!!!...
|06-29-2007, 02:11 PM||#7 (permalink)|
Porch Monkey 4 Life!
s'ok...I'm takin' it back...
My Feedback Thread
|06-30-2007, 12:32 AM||#8 (permalink)|
Join Date: May 2007
That and you can occasionaly find single hole wood grips that are comfy for very cheap since there are only a few markers it will fit.
|Thread Tools||Search this Thread|