Best Trilogy valve?

idkfa · 10-29-2011, 06:32 PM

I am looking at getting either:

Low Turbulence Valve Assembly - Trilogy [PPSP029] - $37.00 : Palmers Pursuit Shop, Where Custom Still Means Something

or

Check It Low Pressure Turbo Valve Kit - Trilogy

Which is better, and why?

EDIT: If it matters it is a Trilogy Comp, which I believe never had the high pressure valve for straight CO2 use as it came with a regulator?

weerez935 · 10-29-2011, 07:22 PM

I would get the palmers, it "looks" to be better machined from the pics.
Also are you going to use CO2?

I would definately upgrade to hpa

magmoormaster · 10-29-2011, 08:29 PM

What are you looking for in the valve? I use the stock one and mine sweetspots at 200-300 PSI (with the stok springs). But of the 2, I'd probably just go with the LT, just with PPS' reputation I imagine it's better than Check-it.

weerez935 · 10-29-2011, 08:33 PM

and after talking to him....he actually designed a valve for the trilogy not just one that will work

idkfa · 10-29-2011, 09:58 PM

Quote:

Originally Posted by magmoormaster

What are you looking for in the valve? I use the stock one and mine sweetspots at 200-300 PSI (with the stok springs). But of the 2, I'd probably just go with the LT, just with PPS' reputation I imagine it's better than Check-it.

Honestly, it sounds like just to spend money... I wanted to drop the pressure down to a range where it could work with my AA Messiah (0-500 psi). It sounds like I am fine with the stock valve as I want this to be a fairly budget semi.

Quote:

Originally Posted by weerez935

and after talking to him....he actually designed a valve for the trilogy not just one that will work

Thanks for the help!

weerez935 · 10-30-2011, 01:28 AM

Be sure to record data before and after valve installation so we can compare!

minimag03 · 10-30-2011, 08:07 PM

A Tornado valve would be the best in my opinion. A Merlin valve should fit a Trilogy. Don't take my word for it but I believe they are the same size.

weerez935 · 10-30-2011, 11:08 PM

a standard cocker valve won't?
I always thought nado valve were standard?

philosophia · 10-31-2011, 09:26 AM

A Trilogy valve is an 11/16 valve. I believe Spyders and most clones use the same as well. I want to say the CCM SS25 uses the same style as well, but I'm not sure.

EDIT: Yep, apparently the SS25 valve is an 11/16 valve as well.

super_stanchy · 10-31-2011, 11:19 AM

my spyder valve (or spyder clone valve) got stuck in my trilly yesterday

i have to figure out how to get it forward or backward.....
if she goes in all the way i dont care

10-29-2011, 06:32 PM	#1 (permalink)
idkfa Stock Class Aficionado Join Date: Mar 2007 Location: Vancouver, BC, Canada	Best Trilogy valve? I am looking at getting either: Low Turbulence Valve Assembly - Trilogy [PPSP029] - $37.00 : Palmers Pursuit Shop, Where Custom Still Means Something or Check It Low Pressure Turbo Valve Kit - Trilogy Which is better, and why? EDIT: If it matters it is a Trilogy Comp, which I believe never had the high pressure valve for straight CO2 use as it came with a regulator? __________________ MCB Feedback The PhOG Feedback eBay Feedback Newfoundland Paintball Supply

10-29-2011, 08:29 PM	#3 (permalink)
magmoormaster aka Maggy Moo Join Date: Jun 2009 Location: Provo, UT	What are you looking for in the valve? I use the stock one and mine sweetspots at 200-300 PSI (with the stok springs). But of the 2, I'd probably just go with the LT, just with PPS' reputation I imagine it's better than Check-it. __________________ Model98.org, Where Tippmanns Have No Limits Feedback WTT 16" Stiffi Switch Tip for a 12" or 14" Tip GONE TIL NOV 2013

10-30-2011, 08:07 PM	#7 (permalink)
minimag03 WVU paintball #19 Join Date: Aug 2006 Location: Morgantown, WV	A Tornado valve would be the best in my opinion. A Merlin valve should fit a Trilogy. Don't take my word for it but I believe they are the same size. __________________ Feeback Gallery

10-31-2011, 09:26 AM	#9 (permalink)
philosophia MCB Baghead Join Date: Apr 2009 Location: The Second Left on the Right, Maine	A Trilogy valve is an 11/16 valve. I believe Spyders and most clones use the same as well. I want to say the CCM SS25 uses the same style as well, but I'm not sure. EDIT: Yep, apparently the SS25 valve is an 11/16 valve as well. __________________ Note to self: PTP detent in the bottom of the bore breech Last edited by philosophia; 10-31-2011 at 09:34 AM.

10-31-2011, 11:19 AM	#10 (permalink)
super_stanchy The Man With No Plan Join Date: Nov 2008 Location: Camas, WA	my spyder valve (or spyder clone valve) got stuck in my trilly yesterday i have to figure out how to get it forward or backward..... if she goes in all the way i dont care __________________ Ryan "Super_Stanchy" Stanchfield Winning General - Red Army - SuperGame XLIII MCB Feedback I do Freak Boring X7 Phenom and SLG Freak Bored Sleeper PMI Thing Black Magic and Splatmaster!

10-29-2011, 07:22 PM	#2 (permalink)
weerez935 MCB Member Join Date: Aug 2011	I would get the palmers, it "looks" to be better machined from the pics. Also are you going to use CO2? I would definately upgrade to hpa

10-29-2011, 08:33 PM	#4 (permalink)
weerez935 MCB Member Join Date: Aug 2011	and after talking to him....he actually designed a valve for the trilogy not just one that will work

10-30-2011, 01:28 AM	#6 (permalink)
weerez935 MCB Member Join Date: Aug 2011	Be sure to record data before and after valve installation so we can compare!

10-30-2011, 11:08 PM	#8 (permalink)
weerez935 MCB Member Join Date: Aug 2011	a standard cocker valve won't? I always thought nado valve were standard?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search