Cocker Worr frame?

paintman161 · 01-17-2012, 04:07 PM

Okay I just got this superstock off ebay and am having a little trouble trying to figure this thing out? What is it and what did they do to it? The button on the rear of the grip does not do anything, just the button on the side!

I am trying to figure what happened here it is not what was pictured (there were no leds on the grip in the pictures of the ebay sale! I am thinking that the 215 i paid is way to much for something half right!?
It does turn on and hold air and shoots but i have no clue what the LEDS and little push buttons are for??

So it looks like the wires broke off of the Button on the back of the grip frame so they just rigged it with the LEDs and push button!
Is there anyplace to get a replacement harness?? or is there a way to solder them back onto the button on the rear of the grip frame?

All-Star Reject · 01-17-2012, 07:04 PM

Looks like they modded the board so it would turn on and off. The original design is a membrane button which is a very poor design which breaks very easily and is a p.o.s.. Paintball gateway no longer has them in stock so ebay or if someone has one used will be the only way to get it. If the mod works keep it that way, less chance of it breaking right before the start of a game.

paintman161 · 01-17-2012, 07:14 PM

yea, unfortunatley the way they had it the push button broke off and cant be resolder on!

twiitch · 01-17-2012, 07:24 PM

oh there is probably a new fix for that involving a new button switch and maybe some new wire. when it turns on, how do the lights function? I'm wondering if he tied them into the solenoid circuits, since there's 2, and no real reason for a double set. and jeez, lets just add more battery draw to a double solenoid system, that already max's out.

I do however like how he left the cautionary stickers on, even though he did a bunch of work to it. sneaky sneaky sir. IMO I would force him to pay for a new board and membrane pad. the most expensive one you can buy on here... especially since they usually come with frames and solenoids. that was mis-representation on his behalf, and that's the punishment. you could probably cost him more than he made off of you.

ceverhart · 01-17-2012, 09:00 PM

I wonder if an e1 board would fit?

paintman161 · 01-17-2012, 10:07 PM

He did not go directly to the solonoid, instead looks like he went through the connector! I did find a replacement wire harness and membrane pad to get it back to original (he is willing to pay for it and a new ball detent!) Other than that the marker is in great working order! He did not give me the stock barrel but gave me a 14" JJJ performance barrel...lol, From what i can see he used a photo from someone elses ebay sale and failed to mention any of the important items! After all is said and done i will basically have a marker he showed for the same price!

twiitch · 01-18-2012, 08:09 PM

so it goes to the connector, but they still fire on the solenoids? it still extra draw no matter what point its from.

01-17-2012, 04:07 PM	#1 (permalink)
paintman161 Post Whore Join Date: Jan 2009 Location: Rochester, NY	Cocker Worr frame? Okay I just got this superstock off ebay and am having a little trouble trying to figure this thing out? What is it and what did they do to it? The button on the rear of the grip does not do anything, just the button on the side! I am trying to figure what happened here it is not what was pictured (there were no leds on the grip in the pictures of the ebay sale! I am thinking that the 215 i paid is way to much for something half right!? It does turn on and hold air and shoots but i have no clue what the LEDS and little push buttons are for?? So it looks like the wires broke off of the Button on the back of the grip frame so they just rigged it with the LEDs and push button! Is there anyplace to get a replacement harness?? or is there a way to solder them back onto the button on the rear of the grip frame? __________________ My feedback: http://www.mcarterbrown.com/forums/f...-feedback.html PBN Feedback Last edited by paintman161; 01-17-2012 at 04:33 PM.

01-17-2012, 07:14 PM	#3 (permalink)
paintman161 Post Whore Join Date: Jan 2009 Location: Rochester, NY	yea, unfortunatley the way they had it the push button broke off and cant be resolder on! __________________ My feedback: http://www.mcarterbrown.com/forums/f...-feedback.html PBN Feedback

01-17-2012, 07:24 PM	#4 (permalink)
twiitch Active Member Join Date: Jul 2010	oh there is probably a new fix for that involving a new button switch and maybe some new wire. when it turns on, how do the lights function? I'm wondering if he tied them into the solenoid circuits, since there's 2, and no real reason for a double set. and jeez, lets just add more battery draw to a double solenoid system, that already max's out. I do however like how he left the cautionary stickers on, even though he did a bunch of work to it. sneaky sneaky sir. IMO I would force him to pay for a new board and membrane pad. the most expensive one you can buy on here... especially since they usually come with frames and solenoids. that was mis-representation on his behalf, and that's the punishment. you could probably cost him more than he made off of you. __________________ CC Feedback: http://customcockers.com/forum/member.php?13906-twiitch MCB feedback: http://www.mcarterbrown.com/forums/f...-feedback.html

01-17-2012, 09:00 PM	#5 (permalink)
ceverhart Seasoned Member Join Date: Mar 2006	I wonder if an e1 board would fit? __________________ http://www.mcarterbrown.com/forums/f...-feedback.html

01-17-2012, 10:07 PM	#6 (permalink)
paintman161 Post Whore Join Date: Jan 2009 Location: Rochester, NY	He did not go directly to the solonoid, instead looks like he went through the connector! I did find a replacement wire harness and membrane pad to get it back to original (he is willing to pay for it and a new ball detent!) Other than that the marker is in great working order! He did not give me the stock barrel but gave me a 14" JJJ performance barrel...lol, From what i can see he used a photo from someone elses ebay sale and failed to mention any of the important items! After all is said and done i will basically have a marker he showed for the same price! __________________ My feedback: http://www.mcarterbrown.com/forums/f...-feedback.html PBN Feedback

01-17-2012, 07:04 PM	#2 (permalink)
All-Star Reject Newbie Join Date: Jun 2010	Looks like they modded the board so it would turn on and off. The original design is a membrane button which is a very poor design which breaks very easily and is a p.o.s.. Paintball gateway no longer has them in stock so ebay or if someone has one used will be the only way to get it. If the mod works keep it that way, less chance of it breaking right before the start of a game.

01-18-2012, 08:09 PM	#7 (permalink)
twiitch Active Member Join Date: Jul 2010	so it goes to the connector, but they still fire on the solenoids? it still extra draw no matter what point its from. __________________ CC Feedback: http://customcockers.com/forum/member.php?13906-twiitch MCB feedback: http://www.mcarterbrown.com/forums/f...-feedback.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search