My cocker has been Rainmakerized

sdlm · 08-04-2007, 11:44 PM

Well, I never used my mechanical cocker anyway, If I want mech it is almost always my Automag that I choose so, I ditched the Shocktech bomb and went with a Rainmaker Solenoid. I don't really have the skills nor drive to make a closed bolt electro conversion, so I went open bolt, it seems to work well, hopefully it will be my new sleeper marker. All I need to do now, is use a board that fits a 9v in the frame and get my shroud back on it.

here is a pic:

and here is my initial test vid, I had the bolt upside down to keep the noise down, didn't want the wife to wake up and kill me!

mustangii · 08-05-2007, 08:58 AM

nothing new the sandridge cockers used mac valves and an angel frame, mini morlock will work and allow you to put battery in the grip. Kennesaw Mountain Markers will also allow you to put a small ram in the grip to release sear for closed bolt opperation but you will have to run 2nd mac valve to opperate it . good luck
edm

Quickling · 10-05-2007, 01:43 PM

Very cool. Yes as mentioned there are other conversions.. but who cares, yours is home brew so it is much cooler and I bet a lot more satisfying. =)

pizzaluvr · 10-05-2007, 02:37 PM

That's awesome... Can't wait to see the finished product.

08-04-2007, 11:44 PM	#1 (permalink)
sdlm Active Member Join Date: May 2007 Posts: 186	My cocker has been Rainmakerized Well, I never used my mechanical cocker anyway, If I want mech it is almost always my Automag that I choose so, I ditched the Shocktech bomb and went with a Rainmaker Solenoid. I don't really have the skills nor drive to make a closed bolt electro conversion, so I went open bolt, it seems to work well, hopefully it will be my new sleeper marker. All I need to do now, is use a board that fits a 9v in the frame and get my shroud back on it. here is a pic: and here is my initial test vid, I had the bolt upside down to keep the noise down, didn't want the wife to wake up and kill me!

08-05-2007, 08:58 AM	#2 (permalink)
mustangii Seasoned Member Join Date: May 2006 Location: Warrensburg MO Posts: 604	nothing new the sandridge cockers used mac valves and an angel frame, mini morlock will work and allow you to put battery in the grip. Kennesaw Mountain Markers will also allow you to put a small ram in the grip to release sear for closed bolt opperation but you will have to run 2nd mac valve to opperate it . good luck edm __________________ www.christianpaintball.com, PBIF (paintball Is Fun) play hard, Pray Harder my feedback http://www.mcarterbrown.com/forums/f...-feedback.html and at ebay http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback2&userid=mustagii&ftab=A llFeedback&sspagename=STRK:ME:UFS Last edited by mustangii; 08-05-2007 at 09:09 AM.

10-05-2007, 02:37 PM	#4 (permalink)
pizzaluvr Nazi-Treasure Hunter Join Date: Jun 2007 Location: Arkansas Posts: 2,753	That's awesome... Can't wait to see the finished product. __________________ MCB Feedback +26/-0 PBN Feedback +2/-0 Rapper LE 14/25 OC/SC Feed-Side Car-CP barrel-Sniper-Mini-Midget-Halfblock I ball for Team Fracture

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-05-2007, 01:43 PM	#3 (permalink)
Quickling Active Member Join Date: Jul 2006 Posts: 119	Very cool. Yes as mentioned there are other conversions.. but who cares, yours is home brew so it is much cooler and I bet a lot more satisfying. =)