mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 10-06-2012, 03:26 AM   #1 (permalink)
Active Member
 
Rotozip2's Avatar
 
Join Date: Aug 2012
Location: St. Louis

CCM Fan
Does the ans mini rammer use smaller threads?

My rammer pulls out likes the threads are stripped, but both threads look fine with no major damage.

Does the mini rammers use a smaller diameter thread size?
Rotozip2 is offline   Reply With Quote
Old 10-06-2012, 04:13 AM   #2 (permalink)
MaD
MCB Member
 
MaD's Avatar
 
Join Date: Oct 2007
Location: A2, Michigan

Nope, same threads. What kind of gun?
__________________
-= MaD =-
Sheridan Seals, Valve Tools, and Parts
Feedback
DIY Paintball Stuff!

Note: While I would love to take credit for his work, I am not associated with Mad Customs!
You can contact BigMatt-MadCustoms in his MCB forum
MaD is online now   Reply With Quote
Old 10-07-2012, 12:31 AM   #3 (permalink)
Active Member
 
Rotozip2's Avatar
 
Join Date: Aug 2012
Location: St. Louis

CCM Fan
03 prostock.
Rotozip2 is offline   Reply With Quote
Old 10-07-2012, 01:08 AM   #4 (permalink)
MaD
MCB Member
 
MaD's Avatar
 
Join Date: Oct 2007
Location: A2, Michigan

So you can literally just pull the ram out of the front block? If so, something is off...
__________________
-= MaD =-
Sheridan Seals, Valve Tools, and Parts
Feedback
DIY Paintball Stuff!

Note: While I would love to take credit for his work, I am not associated with Mad Customs!
You can contact BigMatt-MadCustoms in his MCB forum
MaD is online now   Reply With Quote
Old 10-07-2012, 04:32 AM   #5 (permalink)
Active Member
 
Rotozip2's Avatar
 
Join Date: Aug 2012
Location: St. Louis

CCM Fan
No, the the threads that connect the cocking rod and the ram shaft.
Rotozip2 is offline   Reply With Quote
Old 10-07-2012, 07:09 PM   #6 (permalink)
Rec Poster
 
Dk-79's Avatar
 
Join Date: Jul 2011

The cocking rod and ram shaft aren't connected in any way.

Do you mean the ram and pump arm, or pump arm to the back block?

In any case, if the threads aren't holding up, something is stripped. Almost all autococker parts are universal.

Do you have pictures?
Dk-79 is offline   Reply With Quote
Old 10-07-2012, 09:41 PM   #7 (permalink)
Active Member
 
Rotozip2's Avatar
 
Join Date: Aug 2012
Location: St. Louis

CCM Fan
Quote:
Originally Posted by Dk-79 View Post
The cocking rod and ram shaft aren't connected in any way.

Do you mean the ram and pump arm, or pump arm to the back block?

In any case, if the threads aren't holding up, something is stripped. Almost all autococker parts are universal.

Do you have pictures?
Ram to Pump arm thats what I meant. I dont understand how it could have stripped in the first place.
Rotozip2 is offline   Reply With Quote
Old 10-08-2012, 11:27 AM   #8 (permalink)
Formerly DeTrevni
 
Magoo's Avatar
 
Join Date: Sep 2006
Location: Houston, Tejas

Wait, so the ram shaft just separates from the pump arm? Something is indeed amiss. Just so we're clear: The ram housing threads into the front block. The shaft, which is free-moving, threads into the pump arm. The pump arm threads into the back block. The back block is not attached to the cocking rod, but pushes it when the marker cycles back. The cocking rod threads into the hammer, and cocks the marker when the back block pushes out the cocking rod.

It is the ram shaft and pump arm we're talking about, right?
__________________
King Kong rules.




Last edited by Magoo; 10-08-2012 at 11:33 AM.
Magoo is offline   Reply With Quote
Old 10-10-2012, 12:04 AM   #9 (permalink)
Active Member
 
Rotozip2's Avatar
 
Join Date: Aug 2012
Location: St. Louis

CCM Fan
Yes, ram shaft and pump arm.
Rotozip2 is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » WGP

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 10:43 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC