mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   WGP (http://www.mcarterbrown.com/forums/wgp/)
-   -   New (to me) Pre2k RF STO (http://www.mcarterbrown.com/forums/wgp/221467-new-me-pre2k-rf-sto.html)

Xklamationxix 12-18-2012 10:34 PM

New (to me) Pre2k RF STO
 
So I picked up this Pre2k Right Feed STO. I haven't seen another right feed like it, just a bunch of vert feeds. It came with stock internals and a Pure Energy Inline Regulator. So my plan is to make it a Horizontal Fed Sniper also using my AGD Micro-CA II stock.

I haven't ran it with paint yet, just aired and cycled so far. Currently the PE Inline Reg leaks, plan on replacing that. Pump arm has a lot of twist, any way to remedy this?

Also trying to figure the best way to run 12 grams with the Micro II stock. Should I run a macro line straight to the body? Change internals and regulate it via Palmer Stab? or a Gas Through Grip?

This is how it came
http://i92.photobucket.com/albums/l3...O/IMG_2164.jpg


How it currently sits
http://i92.photobucket.com/albums/l3...STO/photo2.jpg

http://i92.photobucket.com/albums/l3...STO/photo3.jpg

http://i92.photobucket.com/albums/l3...STO/photo1.jpg

http://i92.photobucket.com/albums/l3.../STO/photo.jpg

minimag03 12-19-2012 12:37 AM

That STO caught my eye as well, but the seller attitude stopped me from pursuing it. I'm glad someone here was able to get it from him and back here where it belongs :).

As far as twist in your pump arms, several companies make a piece that attaches to the pump guide rod and around the pump arm to straighten the stroke out. They are similar to the CCM econo kits. I think they are around $10-$15.

Darkapollo 12-19-2012 01:36 AM

Weird! Never saw a side feed STO before.

Xklamationxix 12-19-2012 03:16 AM

@minimag03 - it was a mission to get the STO to me!

Just ordered a Universal Gat Guide, hopefully this will fix the pump arm twist.

Patar 12-20-2012 05:34 PM

weird place to ask, I guess but I've been curious. Is it possible to just stick a 10rd tube into the feedneck and use it like a temporary loader? lol.


I think it'd be a nice way to play. Small profile, easy reload... unique haha. I'd buy a side feed cocker for that!

Xklamationxix 12-21-2012 11:24 PM

@patar, not sure what you mean? as in 10rd tube straight into the Right Feed? That won't work due to the hole in the feedneck being a bit to small.

As a side note, got the Universal Gat Guide installed. Works Great!! Definitely fixed the pump arm twist. Highly recommended
http://i92.photobucket.com/albums/l3...STO/photo4.jpg

Also got this aluminum stock class one piece feed in. Haven't gotten it installed yet, hopefully before the New Year if the building engineers at work are available. Did a quick mock up to check the length, works as a beavertail!
http://i92.photobucket.com/albums/l3...STO/photo5.jpg

As far as setup goes. Leaning towards; stock pre2k valve, unregged with macro line going from the bottomline straight to the body, and still using the AGD Micro-CA II. Anyone have input and/or suggestions?

Darkapollo 12-22-2012 01:06 AM

Quote:

Originally Posted by Xklamationxix (Post 2569960)
Also got this aluminum stock class one piece feed in. Haven't gotten it installed yet, hopefully before the New Year if the building engineers at work are available. Did a quick mock up to check the length, works as a beavertail!

Unless it mounts under the body it doesnt work as a beaver tail. The tail was there to prevent people from thumbing the cocking rod and making the gun shoot hot by pressing on it. It was not designed so you dont smack yourself in the face. That is why pre97 did not have a tail. Bob Long put a cage on his custom autocockers backblock to make them tourny legal. ;)

Xklamationxix 12-22-2012 01:31 AM

@Darkapollo, ahhh ic, totally didn't know that! Thanks!

Darkapollo 12-22-2012 08:31 AM

Your STO should have had a factory tail though since it was the WGP entry to tourny guns.

Patar 12-22-2012 11:01 AM

ah yeah, I meant just like a cram n jam basically. I saw it on an old school cocker once and kinda wanted to do something similar. The marker's looking great so far man :)


All times are GMT -4. The time now is 01:16 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC