autococker build part list?
So I would like to build a autococker pump from the ground up.I plan to get this body
here is what I know it is possibly a 2k1 what i've been told
"Midblocked body. Very clean, professionally done midblocking job. I decided to do the ego feedneck mod myself and the dremel ran down the side of the body, marring the anno finish, pictured. Comes with bolt, sled-style backblock and midblock length pump arm."by seller
What other parts do I need besides a trigger frame,regulator and pump kit?List of parts would be great thanks.Also maybe short description of parts that are upgrades.
What regulator should I get for it.I would like to be able to switch from pump to a regular autococker because I haven't tried pump play yet.
NEW QUESTION for the pump kit will any center guide rod work on any type of pump handles?
you do not need anything else than those you mentioned, if you dont have the lower tube kit, not to sure from the pic
and the two screws for the valve
and if you want to make it mechanical you need
frontblock banjo bolt
awesome thanks would this work, if i were to get it new ? Check It Mid Block/Half Block Autococker Lower Tube Kit
or used this work? + a mid block hammer they have for sale
WGP Autococker Lower Tube Valve Kit Freeflow ANS Macdev Akalmp | eBay
The first one will work, the second one looks like stock wgp internals and the hammer is not slotted for a mid block. The check it is maybe a slight upgrade im not sure, but it has the slotted hammer for the mid block.
Ok so if i get a pump kit I will have to get different length rod right? If so what size? Thanks for the help guys
Half block size. Or cut it and re thread it your self
i found the half block sizes on paintballgateway but it says 2k5? will those work even though it says 2k5
new question up... still don't know operating pressure of autococker?
it dependt, to crono cockers screw in the ivg 2-3 times from flush, and increase the pressure from the reg until peaks. adjust the ivg if necessary
about 300 psi, each valve/spring combo has its own actual pressure
most are between 225-400psi
i normally set my reg to a scosh over 300, IVG 2.5 turns from flush
if im within 20fps, i adjust with IVG
if im not within 20, i adjust with my reg
|All times are GMT -4. The time now is 07:40 AM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC