| ||Thread Tools||Search this Thread|
|01-23-2013, 09:06 PM||#1 (permalink)|
Join Date: Jul 2011
Location: Ontario, Ca
WGP hing frame assembly
Took apart my WGP hinge frame to put a new trigger in it and dont remember how to put it back together...
Ive got the trigger, springs and saftey installed... Just cant figure out the sear..
Can anyone show me a picture or point me towards a diagram/tutorial?
|01-24-2013, 10:40 AM||#2 (permalink)|
You just have to line the holes up and tap the pin in. I use a small screw driver or a small punch to hold it all in place as I tap the pin in.
I cannot remember if the WGP hinge frames have a set screw on the sear pin, but I think it does so don't forget to loosen that when you put the pin in.
1. Line hole in sear up with hole in grip frame.
2. Slide something in place to keep it all in place.
3. Tap pin in.
4. If it has it put the set screw in
|01-24-2013, 07:56 PM||#4 (permalink)|
Join Date: Mar 2009
Location: Columbia, SC
|Thread Tools||Search this Thread|