SF superstock problem.

aaronlecain · 09-14-2007, 10:37 PM

sorry if this is posted already. I searched and couldnt find anything on it.

ok here is my problem. I just got a SF superstock from actionvillage.com and I cant seem to get the trigger to stop bouncing. I am playing in a semi only three man turnie on sunday and am planing on using it. I have adjusted the trigger so there is lots of slop. to try to avoid the "sweet" spot. but it still bounces once and a while. is there any adjustment on the sf frame to remidy this? the manuel is less than helpfull. thanks guys.

Mr. Furious · 09-15-2007, 10:11 PM

Try loosening the screws holding the board and move it forward or back until you find a less bouncy position.

Look for any burrs or irregularities on the part of the trigger that crosses the beam and clean them up carefully if they are there.

Those are the two things I've heard that can help a bouncy SF.

ceverhart · 09-15-2007, 10:15 PM

Try lowering your lpr, lighten cocking mass by buying slick products. You can have big bounce from an lpr set to high.

aaronlecain · 09-15-2007, 11:04 PM

well for now i just put some extra slop in the trigger to try to avoid it. (ran out of air) i will try everything later thanks for all the help guys.

09-14-2007, 10:37 PM	#1 (permalink)
aaronlecain MCB Member Join Date: Jun 2007 Location: Belmont NH Posts: 1,021	SF superstock problem. sorry if this is posted already. I searched and couldnt find anything on it. ok here is my problem. I just got a SF superstock from actionvillage.com and I cant seem to get the trigger to stop bouncing. I am playing in a semi only three man turnie on sunday and am planing on using it. I have adjusted the trigger so there is lots of slop. to try to avoid the "sweet" spot. but it still bounces once and a while. is there any adjustment on the sf frame to remidy this? the manuel is less than helpfull. thanks guys. __________________ Feedback http://www.mcarterbrown.com/forums/f...-feedback.html customcockers.com http://www.customcockers.com/forum/s...ht=aaronlecain

09-15-2007, 10:11 PM	#2 (permalink)
Mr. Furious Got Rage? Join Date: Jun 2007 Location: Northwestern Pennsylvania Posts: 1,902	Try loosening the screws holding the board and move it forward or back until you find a less bouncy position. Look for any burrs or irregularities on the part of the trigger that crosses the beam and clean them up carefully if they are there. Those are the two things I've heard that can help a bouncy SF. __________________ A skeleton walks into a bar and orders a beer and a mop...... Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html

09-15-2007, 10:15 PM	#3 (permalink)
ceverhart Active Member Join Date: Mar 2006 Posts: 444	Try lowering your lpr, lighten cocking mass by buying slick products. You can have big bounce from an lpr set to high. __________________ http://www.mcarterbrown.com/forums/f...-feedback.html Last edited by ceverhart; 09-15-2007 at 10:16 PM. Reason: I cant type lol :)

09-15-2007, 11:04 PM	#4 (permalink)
aaronlecain MCB Member Join Date: Jun 2007 Location: Belmont NH Posts: 1,021	well for now i just put some extra slop in the trigger to try to avoid it. (ran out of air) i will try everything later thanks for all the help guys. __________________ Feedback http://www.mcarterbrown.com/forums/f...-feedback.html customcockers.com http://www.customcockers.com/forum/s...ht=aaronlecain

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search