| ||Thread Tools||Search this Thread|
|04-06-2013, 05:45 PM||#2 (permalink)|
Join Date: May 2008
Pre 2k are different from 2k+
There are also a few weird sizes for certain guns as well. Others could tell you more about it.
My MCB feedback: http://www.mcarterbrown.com/forums/f...ml#post2245661
Misc Sale: http://www.mcarterbrown.com/forums/m...yder-more.html
Parts: Left feed sterling body with detent, sheridan valve tool, SP easy on/off asa in black or chrome/polished clear.
|04-07-2013, 12:15 PM||#8 (permalink)|
Dr. says it will clear up
If it is a mech cocker a bolt upgrade is not going to change much. If you need a new bolt compulsive paintball, paintball gateway have plenty to choose from you need a 2k+ length, unless its a p block, then you will need an evo length bolt.
Autocockers are not more accurate, I'm just more accurate when I shoot autocockers.
|04-07-2013, 01:13 PM||#10 (permalink)|
Join Date: Mar 2013
Location: Beantown, Kid!
For example, a newer mid-2000s WGP STO/EVO length bolt would not work in a '98 STO because the depth of the backblock would prevent it from from lining up with the holes in the bolt. That said, an old Belsales EVO bolt would work perfectly fine in both markers.
Unlike a traditional 'cocker, you can't just swap backblocks to use different generation bolts, because the P-Block design varies from marker to marker and compatibility is key. You could always throw a full backblock and standard bolt on there, though.
|Thread Tools||Search this Thread|