Twisted Cocking Rods

Drachen · 10-12-2007, 12:12 AM

I saw a twisted pump arm some time back. Back before I had any cocker. But haven't seen one since. Never seen one on any markers in pictures or whatnot either. Kind of irritates me. They looked awesome.

Does anyone know where to find those? Or know of anyone that could make one, or two for me?

navyseal07592 · 10-12-2007, 12:14 AM

Do you mean the entire rod, or just the knob? If you mean the whole rod then I want one too!

Drachen · 10-12-2007, 09:31 PM

There was one that the entire rod was twisted. And there was a pump arm that was the same look, where the whole thing from the end of each threaded end was twisted.
It looked awesome, but now for the life of me I can't remember where I saw them.

Drachen · 10-12-2007, 09:46 PM

I FOUND IT!!!!!

Doc's Twisty Rods!

I think they just look awesome. I saw some cocking rods that were the same look, but not in the same place.

Target · 10-12-2007, 09:58 PM

Answer was posted while I searched the net.

Dan

Tallen702 · 10-13-2007, 12:17 AM

KAPP made the twisted cocking rods that had the twist-milled cocking knob at the end o them. Have a blue one on my AC right now.

Drachen · 10-13-2007, 12:59 AM

Do you know anywhere that I'd be able to find one? Preferablly black?

Tallen702 · 10-13-2007, 08:08 AM

I looked last night on froogle (google's shop search engine) but to no avail. I'd give the WTB forum a shot and see what comes up. There are enough old 'cockers floating around on this forum that someone's bound to have one they'll part with.

Drachen · 10-13-2007, 09:30 AM

I looked at my cocker last night and I think I already have a twisted cocking rod. At least the knob at the end has twisted mill job. I was thining more along the lines of the entire thing being twisted. But I can see where that might run into problems with the back block and all.

Jaan · 10-13-2007, 09:35 AM

Quote:

Originally Posted by Drachen

Do you know anywhere that I'd be able to find one? Preferablly black?

Twisted cocking rod? I bought one from PW Paintball last year, he might still have some news ones in stock.

PW Paintball's On Line Store Home Page

Or shoot him a PM: PWPaintball

10-12-2007, 12:12 AM	#1 (permalink)
Drachen Seasoned Member Join Date: Jan 2007 Location: Maplewood, MN Posts: 542	Twisted Cocking Rods I saw a twisted pump arm some time back. Back before I had any cocker. But haven't seen one since. Never seen one on any markers in pictures or whatnot either. Kind of irritates me. They looked awesome. Does anyone know where to find those? Or know of anyone that could make one, or two for me? __________________ Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. Cockers FST Feedback {+10/-0} PBN ~ MCB ~ Special Ops

10-12-2007, 12:14 AM	#2 (permalink)
navyseal07592 MCB Member Join Date: Jan 2007 Location: Atlanta Posts: 148	Do you mean the entire rod, or just the knob? If you mean the whole rod then I want one too! __________________ <>< www.CustomCockers.com Feedback

10-12-2007, 09:31 PM	#3 (permalink)
Drachen Seasoned Member Join Date: Jan 2007 Location: Maplewood, MN Posts: 542	There was one that the entire rod was twisted. And there was a pump arm that was the same look, where the whole thing from the end of each threaded end was twisted. It looked awesome, but now for the life of me I can't remember where I saw them. __________________ Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. Cockers FST Feedback {+10/-0} PBN ~ MCB ~ Special Ops

10-12-2007, 09:46 PM	#4 (permalink)
Drachen Seasoned Member Join Date: Jan 2007 Location: Maplewood, MN Posts: 542	I FOUND IT!!!!! Doc's Twisty Rods! I think they just look awesome. I saw some cocking rods that were the same look, but not in the same place. __________________ Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. Cockers FST Feedback {+10/-0} PBN ~ MCB ~ Special Ops

10-13-2007, 12:17 AM	#6 (permalink)
Tallen702 MCB Member Join Date: Jan 2007 Location: Washington, DC Posts: 923	KAPP made the twisted cocking rods that had the twist-milled cocking knob at the end o them. Have a blue one on my AC right now. __________________ MCB Feedback Ebay Feedback

10-12-2007, 09:58 PM	#5 (permalink)
Target Active Member Join Date: Apr 2006 Location: Syracuse, NY Posts: 481	Answer was posted while I searched the net. Dan

10-13-2007, 12:59 AM	#7 (permalink)
Drachen Seasoned Member Join Date: Jan 2007 Location: Maplewood, MN Posts: 542	Do you know anywhere that I'd be able to find one? Preferablly black? __________________ Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. Cockers FST Feedback {+10/-0} PBN ~ MCB ~ Special Ops

10-13-2007, 08:08 AM	#8 (permalink)
Tallen702 MCB Member Join Date: Jan 2007 Location: Washington, DC Posts: 923	I looked last night on froogle (google's shop search engine) but to no avail. I'd give the WTB forum a shot and see what comes up. There are enough old 'cockers floating around on this forum that someone's bound to have one they'll part with. __________________ MCB Feedback Ebay Feedback

10-13-2007, 09:30 AM	#9 (permalink)
Drachen Seasoned Member Join Date: Jan 2007 Location: Maplewood, MN Posts: 542	I looked at my cocker last night and I think I already have a twisted cocking rod. At least the knob at the end has twisted mill job. I was thining more along the lines of the entire thing being twisted. But I can see where that might run into problems with the back block and all. __________________ Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. Cockers FST Feedback {+10/-0} PBN ~ MCB ~ Special Ops

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search