| ||Thread Tools||Search this Thread|
|10-16-2007, 09:44 AM||#1 (permalink)|
Join Date: Jul 2007
Location: Chester County PA
Rex Dialer questions
I understand that you no longer have to remove the cocking rod to change velocity. I searched on the net and only found the PBReview comments, which were no help. First off, are these still for sale? If so do they work with the ANS style bolt in velo adjusters or the WGP threaded adjusters? Really any info you have on them would be great.
|10-16-2007, 12:24 PM||#2 (permalink)|
Join Date: Jan 2007
Location: Clarksburg, MD (might as well be DC)
Basically they were a stainless steel collar that was bolted into place in the lower tube by your beaver-tail screw. Inside was an IVG that had two notches in it as well as the original hex-key hole for the cocking rod to run through. Those two slots correspond to a metal "key" that has a slot cut in it that allows you to place it around the cocking rod and use the two tabs on the bottom of the "key" to move the IVG in or out to fine tune your velocity. They worked well, but can be a pain to keep in place while you're trying to screw/bolt everything together.
|10-16-2007, 12:49 PM||#3 (permalink)|
what happened to the pink
Are there any good alternatives?
|10-16-2007, 01:15 PM||#4 (permalink)|
Join Date: Mar 2006
Location: Everett, WA.
Not really. Rex dialers are the bomb. Until you lose the key.
Boy, the next words out of your mouth better be some brilliant Mark Twain S**t. Cuz it's definately gettin chisled on your tombstone.
Had it been a blind body and not blue I would of jumped on it like an eithiopian on a steak dinner.
My Ex-Wife is ungrateful She Never Used the Wedding present I bought her......A COFFIN
|10-21-2007, 07:58 PM||#6 (permalink)|
Join Date: Oct 2007
I have one I like quite a bit, but i don't know what brand it is. Thought it was a Rex Dialer...
It's the same steel collar, with a large set screw inside it. Then, on the side, riding shotgun on the seam, is a smaller set screw, so a 3/32 allen wrench is used to adjust the velocity, requiring only a small hole to be drilled in the backblock to slip the wrench into. I like it because this way I don't need to rechrono every time I strip down my marker, as the collar stays the same length.
Belsales REX Hammer Kit and Autococker Hammers & Hammer Kits - Compulsive Paintball, Inc.
Think it's this one.
|Thread Tools||Search this Thread|