|mfoga ||10-18-2007 04:08 PM |
Stock Class Feed for Cocker
Anyone know of a Body that you can convert to a Stock Class(horizontal) feed tube. I have a sniper now thats a right hand side feed that I would like to try and replace the body and make it a Stock Class feed sniper.
|mfoga ||10-19-2007 01:57 PM |
I was hoping to do something on a vertical feed. I was actually thinking of having two snippers, on with the right side feed and the regular pump kit and a single slide frame and then one with the WWA Premium Pump Kit and the hinge trigger. I have seen some cockers with a stock feed tube on a verticle feed style body.
The feed would be offset to the right, but the conversion to stockclass feed is probably easiest on PTP F/X cocker bodies with the addition of a Phantom feed block. The body requires no modification as they have a bolt on feedneck and a contoured top that doesn't get in the way. The PTP Sleeper body would probably work too, but might require more modifications to the Phantom stock feed components to clear the sight rail (which is basically milled off on the F/X).
Lots of people have done this with the PTP Micrococker bodies as well.
|JKIRB23 ||06-17-2013 09:47 AM |
i feel like these would look ugly because they would protrude out from the body of the gun unlike the ccm phantom feed mod for cockers.
|danssoslow ||06-17-2013 10:50 AM |
You could find a round top convertible body and attatch a CCI feedtube on top. That's as tight of a profile as I could imagine.
|Panda ||06-17-2013 11:14 AM |
Walz also makes them
|All times are GMT -4. The time now is 12:28 PM. || |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC