Stock Class Feed for Cocker

mfoga · 10-18-2007, 04:08 PM

Anyone know of a Body that you can convert to a Stock Class(horizontal) feed tube. I have a sniper now thats a right hand side feed that I would like to try and replace the body and make it a Stock Class feed sniper.

thumper · 10-19-2007, 08:48 AM

Stocker Tube [PPSP051] - $40.00 : Palmers Pursuit Shop!, Where Custom Still Means Something

mfoga · 10-19-2007, 01:57 PM

I was hoping to do something on a vertical feed. I was actually thinking of having two snippers, on with the right side feed and the regular pump kit and a single slide frame and then one with the WWA Premium Pump Kit and the hinge trigger. I have seen some cockers with a stock feed tube on a verticle feed style body.

WilD · 10-19-2007, 02:17 PM

The feed would be offset to the right, but the conversion to stockclass feed is probably easiest on PTP F/X cocker bodies with the addition of a Phantom feed block. The body requires no modification as they have a bolt on feedneck and a contoured top that doesn't get in the way. The PTP Sleeper body would probably work too, but might require more modifications to the Phantom stock feed components to clear the sight rail (which is basically milled off on the F/X).

Lots of people have done this with the PTP Micrococker bodies as well.

10-18-2007, 04:08 PM	#1 (permalink)
mfoga Newbie Join Date: Oct 2007 Posts: 5	Stock Class Feed for Cocker Anyone know of a Body that you can convert to a Stock Class(horizontal) feed tube. I have a sniper now thats a right hand side feed that I would like to try and replace the body and make it a Stock Class feed sniper.

10-19-2007, 08:48 AM	#2 (permalink)
thumper Active Member Join Date: Jul 2006 Posts: 255	Stocker Tube [PPSP051] - $40.00 : Palmers Pursuit Shop!, Where Custom Still Means Something __________________

10-19-2007, 02:17 PM	#4 (permalink)
WilD the MilD MOD Join Date: Mar 2006 Location: The Motor City Posts: 2,540	The feed would be offset to the right, but the conversion to stockclass feed is probably easiest on PTP F/X cocker bodies with the addition of a Phantom feed block. The body requires no modification as they have a bolt on feedneck and a contoured top that doesn't get in the way. The PTP Sleeper body would probably work too, but might require more modifications to the Phantom stock feed components to clear the sight rail (which is basically milled off on the F/X). Lots of people have done this with the PTP Micrococker bodies as well. __________________ PGPOG #79 POG #1055

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-19-2007, 01:57 PM	#3 (permalink)
mfoga Newbie Join Date: Oct 2007 Posts: 5	I was hoping to do something on a vertical feed. I was actually thinking of having two snippers, on with the right side feed and the regular pump kit and a single slide frame and then one with the WWA Premium Pump Kit and the hinge trigger. I have seen some cockers with a stock feed tube on a verticle feed style body.