| ||Thread Tools||Search this Thread|
|10-28-2013, 07:02 PM||#1 (permalink)|
Join Date: Apr 2012
question on trilogy
Hey guys i just picked up a trilogy sf for cheap that needs work so i got it all cleaned up but when I cock the gun and pull the trigger it won't un-cock? (no air on it)
What needs to be adjusted?
Feedback for me
|10-28-2013, 07:23 PM||#2 (permalink)|
Join Date: Nov 2008
Location: East Mids, UK
Does it have a new, good battery in it? IIRC they don't like low voltage.
|11-06-2013, 11:55 PM||#3 (permalink)|
Join Date: Jul 2006
Location: Clinton, MO
doesn't the trilogy SF need air to operate? Does it have a hose that goes into the grip frame?
I b da fat one
If loud pipes save lives imagine what bright pink helmets could do.
my feedback http://www.mcarterbrown.com/forums/f...-feedback.html
|11-07-2013, 07:56 AM||#5 (permalink)|
Join Date: Jul 2011
It doesn't need air. It has an electronic trigger, it needs (1) a good battery, (2) to be turned on and (3) the safety to be off.
I've torn a couple apart, only to realize the safety was on, after I had it back together and still not work.
|11-07-2013, 03:14 PM||#6 (permalink)|
I like Guns and Cigars.
Join Date: Jul 2008
The Trilogy SF requires air for the sear to operate. It will not release the hammer without an air source.
At the end of a day of play I would loosen the screws on the trigger frame to uncock it.
|11-07-2013, 03:42 PM||#7 (permalink)|
Join Date: Apr 2009
Location: The Second Left on the Right, Maine
|11-07-2013, 05:50 PM||#8 (permalink)|
Dr. says it will clear up
Seriously, just pull the timing rod and it will release the sear. I used to do the trigger frame screw thing myself until I discovered the timing rod trick.
Autocockers are not more accurate, I'm just more accurate when I shoot autocockers.
|11-16-2013, 01:04 AM||#9 (permalink)|
Join Date: Nov 2011
Location: Rice Lake, WI
|Thread Tools||Search this Thread|