mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   WGP (http://www.mcarterbrown.com/forums/wgp/)
-   -   WGP regulator rebuild (http://www.mcarterbrown.com/forums/wgp/247789-wgp-regulator-rebuild.html)

JKR 12-18-2013 08:21 PM

WGP regulator rebuild
 
Anyone have a list of matching springs and orings for the inline WGP regulators? Wondering how to rebuild since WGP is out of business and this reg is no longer available.

minimag03 12-22-2013 11:13 AM

The first thing you wanna know if these regs are still being made and used in modern guns. KEE must have bought the rights to its design when they bought WGP, cause this exact reg is used on the Empire Sniper and Resurrection. Their rebuild parts should work perectly if you wanna go that route. PBGateway also has original WGP parts if you'd rather have those:

WGP Inline Regulators & Parts



The reg is pretty simple, with only 2 orings and it's seat. The oring around the large piston is a 112 and the oring around the smaller brass piston is 011. The reg seat can just be flipped over to it's unused side if the reg has never been rebuilt; no need to buy a new one.

The 011 oring might actually be 010 or 012. WGP slightly changed the design of the reg over the years, so if you have a very old one, you might have to use a different oring, prob 010 IIRC.

JKR 12-22-2013 05:23 PM

Excellent info! Thank you.

JKR 12-24-2013 05:43 PM

minimag03...

Do you know if the parts compatibility also applies with the old preset regulator also in addition to say the Ergo regs?

SneakySnakeCocker 12-24-2013 09:18 PM

I still have my manual, do you want me to look any references up and post it for you here?

river031403 12-24-2013 10:22 PM

I have a wgp ergo regulator in excellent working and cosmetic condition for sale if you'd like

timekeeper 12-25-2013 12:54 AM

Quote:

Originally Posted by JKR (Post 2868259)
minimag03...

Do you know if the parts compatibility also applies with the old preset regulator also in addition to say the Ergo regs?

Everything above the actual urethane seat, including it, is compatible with any WGP HPR and the HP side of the sledgehammer LPR.

JKR 12-25-2013 04:51 PM

Quote:

Originally Posted by timekeeper (Post 2868417)
Everything above the actual urethane seat, including it, is compatible with any WGP HPR and the HP side of the sledgehammer LPR.

Excellent! I just purchased an old Autococker with preset reg...figured a rebuild would be a good idea.

river031403 12-25-2013 05:01 PM

Quote:

Originally Posted by JKR (Post 2868673)
Excellent! I just purchased an old Autococker with preset reg...figured a rebuild would be a good idea.

I saw a wgp rebuild kit on eBay. Also wouulf here on MCB has a very clean one in his stash of parts it's a clean complete reg it came off my 04 prostock


All times are GMT -4. The time now is 09:29 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC