mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 02-10-2014, 04:21 PM   #1 (permalink)
Newbie
 
Join Date: Jan 2013

New Trilogy Owner.

Got a Autococker Trilogy Competition in original form from ebay. It is in great shape cosmetically but looks like its been sitting. I see no bolt wear on bolt its self or breach. Besides adding some oil in the ASA and do a few dry fires. I have some Dye slick lube for now to use on bolt o-rings. Anything else i should check over?

One last thing my 50/4500 tank has a LP shims installed. I need to revert it back to HP output correct for this marker?
FoxHound is offline   Reply With Quote
Old 02-10-2014, 04:31 PM   #2 (permalink)
MCB Member
 
THE Hulk's Avatar
 
Join Date: Jan 2008

CCM Fan
AKA Fan
I have a trilogy competition (black/red). I use a high pressure tank on it. Don't think it'll work good with a low pressure tank but my feelings won't be hurt if another person chimes it. The oil is ok. I don't use lube on mine. Instead I sparingly use oil on the bolt o-rings. Too much will collect dirt and the sort.
THE Hulk is offline   Reply With Quote
Old 02-10-2014, 08:26 PM   #3 (permalink)
I like Guns and Cigars.
 
maggot's Avatar
 
Join Date: Jul 2008
Location: MO

You need a standard output tank and a few drops of oil in the ASA.
__________________


Otter Customs Paintball - - - - Straight Up Cigars - - - - My Feedback
maggot is offline   Reply With Quote
Old 02-10-2014, 08:42 PM   #4 (permalink)
Newbie
 
Join Date: Jan 2013

Thanks for the replies.
FoxHound is offline   Reply With Quote
Old 02-10-2014, 08:58 PM   #5 (permalink)
Seasoned Member
 
DamoNAN's Avatar
 
Join Date: Apr 2007
Location: Silver Springs, Fl

The Trilogy Competition was a step up from the Sport, as it used lower pressure internals. I have one milled to hell and run the reg at 280 psi, but my tank is standard input (Ninja Pro reg on a 45/45). Mine is pump converted, but shoots really well and is consistent to about +/- 5 bps.
DamoNAN is offline   Reply With Quote
Old 02-11-2014, 12:06 AM   #6 (permalink)
aka Maggy Moo
 
magmoormaster's Avatar
 
Join Date: Jun 2009
Location: Provo, UT



Regardless of which version of Trilogy you have, you can use an LP tank. LP tanks output at ~450 PSI; Trilogies with regs are set at ~350 PSI IIRC, and will sweetspot much lower (my stock Competition sweetspots somewhere between 200-250 PSI). Since it's a mech gun you don't really have to worry about having a higher output. The only reason you want a higher output in the first place is to give your tank room to recharge during fast firing. And if it's a Sport, they can run down pretty low without changing springs as well.
__________________
Feedback

Quote:
Originally Posted by Chad Thompson View Post
Who is this Chad Thompson you all are talking about?
magmoormaster is offline   Reply With Quote
Old 02-11-2014, 01:44 PM   #7 (permalink)
Newbie
 
Join Date: Jan 2013

Quote:
Originally Posted by magmoormaster View Post


Regardless of which version of Trilogy you have, you can use an LP tank. LP tanks output at ~450 PSI; Trilogies with regs are set at ~350 PSI IIRC, and will sweetspot much lower (my stock Competition sweetspots somewhere between 200-250 PSI). Since it's a mech gun you don't really have to worry about having a higher output. The only reason you want a higher output in the first place is to give your tank room to recharge during fast firing. And if it's a Sport, they can run down pretty low without changing springs as well.
I have no issue converting my tank back. its a Pure Energy Ultra and had a LP kit which really made it a mid output tank.

2 more questions Delrin Bolts - I read the Pro came with Delrin is this true? and if so did it come with a delrin bolt with o-rings or non.

Lastly inline reg - Is the stock reg adjustable in anyway?


here is a pic when i got it. It has that pinkish look going on the ano than red like old spyder pilots did..more on the back block but I will replace asa with black on/off. its more dust than polished finish too.

Last edited by FoxHound; 03-05-2014 at 12:30 AM.
FoxHound is offline   Reply With Quote
Old 02-11-2014, 03:16 PM   #8 (permalink)
aka Maggy Moo
 
magmoormaster's Avatar
 
Join Date: Jun 2009
Location: Provo, UT

Yeah that's the Competition. Same one I have. GREAT gun. Easily my favorite gun (cocker or otherwise) that I've ever shot.

The stock reg is adjustable. You'll see on the bottom section of the reg body that there are wrench flats. Take that part off and you'll see a screw, which is your adjustment screw. They aren't the easiest to adjust, but they are really consistent regs. I've seen mine do +/-4 with pretty lousy paint before.

I'm not sure about the bolt, so I'll leave that to someone else.
__________________
Feedback

Quote:
Originally Posted by Chad Thompson View Post
Who is this Chad Thompson you all are talking about?
magmoormaster is offline   Reply With Quote
Old 02-11-2014, 03:52 PM   #9 (permalink)
Law
Geek
 
Law's Avatar
 
Join Date: Feb 2011
Location: MA

Quote:
Originally Posted by FoxHound View Post
2 more questions Delrin Bolts - I read the Pro came with Delrin is this true? and if so did it come with a delrin bolt with o-rings or non.
The Pro does come with a Delrin bolt which has 2 orings. I've got a pro and a competition, and the Delrin bolt is nice, less wear, smoother feel.
Law is offline   Reply With Quote
Old 02-11-2014, 04:06 PM   #10 (permalink)
Stock Class Aficionado
 
idkfa's Avatar
 
Join Date: Mar 2007
Location: Vancouver, BC, Canada

CCM Fan
Interesting thing about the Trilogy Comp, I believe it was made in two different finishes. I don't know if it was official models but I had two different Comp bodies, one was more pink than red and glossy, the other one was red and dust.
__________________
idkfa is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » WGP

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 12:21 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC