mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   WGP (http://www.mcarterbrown.com/forums/wgp/)
-   -   Old Slider Frame Internals (http://www.mcarterbrown.com/forums/wgp/252291-old-slider-frame-internals.html)

tiny 03-01-2014 04:09 PM

Old Slider Frame Internals
 
I have an empty older WGP slider frame (the ones that take single hole grips) and I'd like to get some use out of it, what do I need to get it working? It is completely empty, I have the original trigger plate for it but that seems to be it.

FoxHound 03-01-2014 04:50 PM

Doing some research I had same questions.. Found this on pbn Building An Autococker 101

Besides frame and trigger plate can be different pre 98 vs 2k. I think (could be wrong) the rest of the parts our interchangeable between both versions . Sorry if this don't help much I'm learning still.

maggot 03-01-2014 05:16 PM

Since you already have the trigger plate you will need: sear, sear pin, and 2 springs (come in a maddmann kit).

tiny 03-01-2014 06:41 PM

Quote:

Originally Posted by FoxHound (Post 2911713)
Doing some research I had same questions.. Found this on pbn Building An Autococker 101

Besides frame and trigger plate can be different pre 98 vs 2k. I think (could be wrong) the rest of the parts our interchangeable between both versions . Sorry if this don't help much I'm learning still.

Quote:

Originally Posted by maggot (Post 2911727)
Since you already have the trigger plate you will need: sear, sear pin, and 2 springs (come in a maddmann kit).

Thanks guys!


All times are GMT -4. The time now is 03:24 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC