mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 03-26-2014, 09:06 PM   #1 (permalink)
Active Member
 
Pingdog's Avatar
 
Join Date: Feb 2013
Location: B.C. Canada

help identify cocker

Here is one of my cockers, I think it is a pre 99 STO but I don't know...I do know that there is Palmer's front pneumatics but that's it...might sell it...what range would I ask?
Pingdog is offline   Reply With Quote
Old 03-26-2014, 09:33 PM   #2 (permalink)
MaD
MCB Member
 
MaD's Avatar
 
Join Date: Oct 2007
Location: A2, Michigan

Oh odd... I want to say it's a garage gun but has some similarities to a P&P. Could have been a custom job there.
__________________
-= MaD =-
Sheridan Seals, Valve Tools, and Parts
Feedback
DIY Paintball Stuff!

Note: While I would love to take credit for his work, I am not associated with Mad Customs!
You can contact BigMatt-MadCustoms in his MCB forum
MaD is offline   Reply With Quote
Old 03-26-2014, 09:46 PM   #3 (permalink)
Active Member
 
Pingdog's Avatar
 
Join Date: Feb 2013
Location: B.C. Canada

cocker

It is a nice shooting old gun...thoughts on the pre 99??
Pingdog is offline   Reply With Quote
Old 03-26-2014, 09:49 PM   #4 (permalink)
MCB Member
 
Grendel's Avatar
 
Join Date: Apr 2006
Location: Lexington, SC

Pre-2K given the AKA Volumizer screwed into the front block. I agree a garage/customized stock gun given that the milling is post anodizing. Nice looking gun regardless and some quality parts that can bee seen.
__________________


"Rather fail with honor than succeed by fraud." -Sophocles

My Pyre #PY008 RF Oak Grendel's Feedback on MCB
Grendel is offline   Reply With Quote
Old 03-26-2014, 09:55 PM   #5 (permalink)
MCB Member
 
Riddler's Avatar
 
Join Date: Apr 2006
Location: pgh, pa

CCM Fan
Looks like a '98 or '99 from here. Milling is in the style of Carter, not that he necessarily touched it. P&P backblock. ANS LPR. PPS ram. Can't quite see the 4-way. Not an AKA volley - maybe a Taso.
__________________
MCB feedback
Riddler is offline   Reply With Quote
Old 03-27-2014, 01:38 PM   #6 (permalink)
Active Member
 
DefTone's Avatar
 
Join Date: Apr 2009
Location: South Dakota "Yes it sucks as bad as you think"

I'd say garage gun too, but still looks good...Front block looks like a Palmer Rock, Palmer Ram, either Taso or ANS lp chamber, and hard to tell on the 3way but from the little I can see it looks like a green ANS or something.
Price wise it's a hard call, old right feed stock bodies don't bring a ton "even with the milling & green finish"...Your probably in the $150-$175 range as a whole, but you could probably part it out and do as well if not a little better if it has an aftermarket valve/hammer in it.
__________________
Empire Resurrection Cocker
CCM S6 pump
WGP Outkast Check It/CCM pump
'99 STO Cocker
DefTone is offline   Reply With Quote
Old 03-27-2014, 01:45 PM   #7 (permalink)
MCB Member
 
Riddler's Avatar
 
Join Date: Apr 2006
Location: pgh, pa

CCM Fan
Is an ANS Jackhammer LPR. Note the retaining grub screws at the rear of the body.
__________________
MCB feedback
Riddler is offline   Reply With Quote
Old 03-27-2014, 01:47 PM   #8 (permalink)
Active Member
 
DefTone's Avatar
 
Join Date: Apr 2009
Location: South Dakota "Yes it sucks as bad as you think"

Quote:
Originally Posted by Riddler View Post
Is an ANS Jackhammer LPR. Note the retaining grub screws at the rear of the body.

Your right, I just glanced at it and thought Palmer cause it was a tube style, it's al older one cause all the later and lpr where the hour glass shape
__________________
Empire Resurrection Cocker
CCM S6 pump
WGP Outkast Check It/CCM pump
'99 STO Cocker
DefTone is offline   Reply With Quote
Old 03-27-2014, 07:17 PM   #9 (permalink)
Rec Poster
 
2KZX2's Avatar
 
Join Date: Aug 2012
Location: Coronado, CA

HMM. Reminds me of mine A bit. I was told it's a Carter, but it also looks like it could be a KAPP. I don't really care. I love this gun regardless of where it came from.

2KZX2 is offline   Reply With Quote
Old 03-27-2014, 09:55 PM   #10 (permalink)
MCB Member
 
Riddler's Avatar
 
Join Date: Apr 2006
Location: pgh, pa

CCM Fan
Your olive gun there was definitely milled by KAPP. Don't know if the anodizing is original - might've been one sold to NPS to be branded and lasered with a 32 Degrees logo in the trapezoid area of the rear upper tube.

(and obviously the brown gun is a Carter)
__________________
MCB feedback
Riddler is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » WGP

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 06:02 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC