| ||Thread Tools||Search this Thread|
|01-23-2008, 05:42 PM||#1 (permalink)|
Running un-regged, spring questions.
Hey MCB, got a few questions about springs for ya'.
Seeing as it's hard for me to find Cocker reg parts for my original reg, I figured I'm just going to run it un-regged with a Crossfire 850psi output system (until I can afford a Sidewinder or a Stabilizer). Now since my Cocker originally had a reg this obviously means it needs to be re-springed.
Question is, what spring combo works best for high pressure use? I was thinking a hard valve spring and a light or medium main spring, for minimal dwell time and maximum efficency.
|01-23-2008, 10:20 PM||#2 (permalink)|
That's the right theory.
Start with the heavy valve spring and the light hammer spring, and if you can't enough velocity, step up the medium hammer spring.
Please Leave Me Feedback
|Thread Tools||Search this Thread|