Is this correct?

Aceospadez · 02-29-2008, 02:10 AM

I just purchased an autococker last night (figured for the price, why not) and the seller claims its a 2000. He seems like a stand up guy so I'm not accusing him of anything, but the frame is throwing me off... So tell me, wise ones, what year 'cocker is this? Thanks in advance!!

I'll be able to post more pics once it arrives...

sdlm · 02-29-2008, 02:14 AM

since it has second pump arm milling and a jewel it is a 2K+

use your sn here: Autococker Dating to get a better date.

Aceospadez · 02-29-2008, 02:15 AM

I havent recieved it yet, but i will check that out once it comes. Thanks

russc · 02-29-2008, 02:45 AM

you can see those in the picture. It's definitely a 2k+

Aceospadez · 02-29-2008, 02:51 AM

Sorry I should have been more specific, I'll check the sn when it arrives...

Also I plan on installing a pump kit and running a 3.5oz vertically. I've been doing some research around the forums and figure I may have to do some respringing, is there anything else you guys could imagine I'd need to do to get it shooting well?

Grendel · 02-29-2008, 03:45 AM

Just rip off the pneumatics, install a pump kit and you'll be able to roll. The stock valve for a 2K+ is very good. You said you are going to run with a 3.5 oz tank, is that straight in the ASA with out a reg? If so you might have to respring and to get good effiecieny and you could re-valve/respring it with a pre-98 [or is it 96] valve but that usually is only necessary if you go 12g.

Milky Spore · 02-29-2008, 02:43 PM

I believe it was pre-97' actually. WGP enlraged the valve chamber in 98' I read.

Anyways, you'll need to re-spring to get proper velocity and efficency. IIRC, I've heard of chamber de-volumizers to lower the volume of the valve chamber and make the marker suited better towards HP use. I think Wevo sold them.

That is also definitely a 2K+. The frame was just added on later, they originally came with sliders. The ball detent looks a little akward though.

Fluff · 02-29-2008, 04:16 PM

well, the body is 2k+ the frame is a 2k3+. It could have been swapped. I have that frame on a 99 sniper conversion.

Murph · 02-29-2008, 04:43 PM

The frame was also an aftermarket piece before 2k3, and they came standard on a couple 2k2 custom bodies.

Aceospadez · 02-29-2008, 05:29 PM

Yeah I was planning on running it w/o the reg. I like the look and feel of the tank hanging off the asa, but if it doesnt work out i can just throw the reg back on and relocate the tank. I'll also keep the valve/internal switch idea in mind.

Someone mentioned that it probably came with a slider frame, do any of you have an extra you would like to part with; perhaps trade? yeah that probably should go in the WTB section but since I got you all here I figured I'd ask.

02-29-2008, 02:10 AM	#1 (permalink)
Aceospadez Newbie Join Date: Jul 2006 Posts: 18	Is this correct? I just purchased an autococker last night (figured for the price, why not) and the seller claims its a 2000. He seems like a stand up guy so I'm not accusing him of anything, but the frame is throwing me off... So tell me, wise ones, what year 'cocker is this? Thanks in advance!! I'll be able to post more pics once it arrives...

02-29-2008, 02:45 AM	#4 (permalink)
russc MCB Member Join Date: Apr 2006 Location: Vancouver, BC Posts: 4,254	you can see those in the picture. It's definitely a 2k+ __________________ YouTube Channel / Raincouver! / Gallery / Feedback / Blackleaf Outfitters -Russ

02-29-2008, 03:45 AM	#6 (permalink)
Grendel Has Been :) Join Date: Apr 2006 Location: Lexington, SC Posts: 650	Just rip off the pneumatics, install a pump kit and you'll be able to roll. The stock valve for a 2K+ is very good. You said you are going to run with a 3.5 oz tank, is that straight in the ASA with out a reg? If so you might have to respring and to get good effiecieny and you could re-valve/respring it with a pre-98 [or is it 96] valve but that usually is only necessary if you go 12g. __________________ "Rather fail with honor than succeed by fraud." -Sophocles My Pyre #PY008 RF Oak Grendel's Feedback on MCB

02-29-2008, 02:43 PM	#7 (permalink)
Milky Spore Active Member Join Date: Oct 2007 Location: West Springfield, MA. Posts: 289	I believe it was pre-97' actually. WGP enlraged the valve chamber in 98' I read. Anyways, you'll need to re-spring to get proper velocity and efficency. IIRC, I've heard of chamber de-volumizers to lower the volume of the valve chamber and make the marker suited better towards HP use. I think Wevo sold them. That is also definitely a 2K+. The frame was just added on later, they originally came with sliders. The ball detent looks a little akward though. __________________ Xtreme Paintball My Feedback. Shocker Sport Turbo F/S

02-29-2008, 04:16 PM	#8 (permalink)
Fluff Excalibur! Join Date: Mar 2006 Posts: 2,476	well, the body is 2k+ the frame is a 2k3+. It could have been swapped. I have that frame on a 99 sniper conversion. __________________ After the game... the King and the Pawn both go back into the same box. - Italian Proverb If you drink from a bottle marked 'poison,' it is almost certain to disagree with you, sooner or later.-Lewis Carroll Illigitimi non-carborundum 843rd bomber wing "Peace Is Our Profession"

02-29-2008, 02:14 AM	#2 (permalink)
sdlm Active Member Join Date: May 2007 Posts: 186	since it has second pump arm milling and a jewel it is a 2K+ use your sn here: Autococker Dating to get a better date.

02-29-2008, 02:15 AM	#3 (permalink)
Aceospadez Newbie Join Date: Jul 2006 Posts: 18	I havent recieved it yet, but i will check that out once it comes. Thanks

02-29-2008, 02:51 AM	#5 (permalink)
Aceospadez Newbie Join Date: Jul 2006 Posts: 18	Sorry I should have been more specific, I'll check the sn when it arrives... Also I plan on installing a pump kit and running a 3.5oz vertically. I've been doing some research around the forums and figure I may have to do some respringing, is there anything else you guys could imagine I'd need to do to get it shooting well?

02-29-2008, 05:29 PM	#10 (permalink)
Aceospadez Newbie Join Date: Jul 2006 Posts: 18	Yeah I was planning on running it w/o the reg. I like the look and feel of the tank hanging off the asa, but if it doesnt work out i can just throw the reg back on and relocate the tank. I'll also keep the valve/internal switch idea in mind. Someone mentioned that it probably came with a slider frame, do any of you have an extra you would like to part with; perhaps trade? yeah that probably should go in the WTB section but since I got you all here I figured I'd ask.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search