sniper hammer problem

AlexH · 03-27-2008, 07:25 PM

i just got my internals in the mail today. i put in the hammer, spring, ivg and cocking rod. i pumped it and pulled the trigger a few times. on like the 5th time the hammer would not go back. it is stuck forward. how am i sopposed to get it out without destroying the gun.lol. thanks for all the help in advance.

hvacman250 · 03-27-2008, 07:53 PM

Hold the hammer back and pull on the cocking rod. Dont know what it can be stuck on???

Mar · 03-27-2008, 08:10 PM

I think you may have set the hammer lug too low (despite the first few good shots)

Remove the gripframe, and try again but back up the hammer lug.

AlexH · 03-27-2008, 08:16 PM

its stuck so i cant get the allen head in the hole to adjust the lug.

AlexH · 03-27-2008, 08:17 PM

and so you know the frame is off and it is still stuck. rock solid.

Mar · 03-27-2008, 08:30 PM

wow, that is odd as hell....

Remove cocking rod and IVG, insert small dowel and give a tap with hammer?

Maybe something got stuck in there with it and it is wedged?

AlexH · 03-27-2008, 08:40 PM

ill try that but from the fron of the gun since the valve and stuff is out.

hvacman250 · 03-27-2008, 08:43 PM

The valve is out?

If so, Im gussing you didnt run the lug down into the slot. If the valve is indeed out, stick your pump rod thru the hole in the front of the body and push it out.

AlexH · 03-27-2008, 08:46 PM

it took a dowel rod and a hammer but i got it unstuck and i didnt even break anything

Jordan · 03-28-2008, 04:53 PM

If the valve was out and you were cocking back the hammer and pulling the trigger, you may have jammed the hammer into the valve nut threads - pray to Velcor that you didn't screw those threads up.

NEVER do that. It's a good way to destroy a body.

Jordan

03-27-2008, 07:25 PM	#1 (permalink)
AlexH Active Member Join Date: Feb 2008 Posts: 111	sniper hammer problem i just got my internals in the mail today. i put in the hammer, spring, ivg and cocking rod. i pumped it and pulled the trigger a few times. on like the 5th time the hammer would not go back. it is stuck forward. how am i sopposed to get it out without destroying the gun.lol. thanks for all the help in advance.

03-27-2008, 07:53 PM	#2 (permalink)
hvacman250 www.pbpumpshop.com Join Date: Nov 2006 Posts: 836	Hold the hammer back and pull on the cocking rod. Dont know what it can be stuck on??? __________________ Feedback

03-27-2008, 08:10 PM	#3 (permalink)
Mar more sig'ed than your mom Join Date: Aug 2006 Posts: 2,380	I think you may have set the hammer lug too low (despite the first few good shots) Remove the gripframe, and try again but back up the hammer lug. __________________

03-27-2008, 08:30 PM	#6 (permalink)
Mar more sig'ed than your mom Join Date: Aug 2006 Posts: 2,380	wow, that is odd as hell.... Remove cocking rod and IVG, insert small dowel and give a tap with hammer? Maybe something got stuck in there with it and it is wedged? __________________

03-27-2008, 08:43 PM	#8 (permalink)
hvacman250 www.pbpumpshop.com Join Date: Nov 2006 Posts: 836	The valve is out? If so, Im gussing you didnt run the lug down into the slot. If the valve is indeed out, stick your pump rod thru the hole in the front of the body and push it out. __________________ Feedback

03-27-2008, 08:16 PM	#4 (permalink)
AlexH Active Member Join Date: Feb 2008 Posts: 111	its stuck so i cant get the allen head in the hole to adjust the lug.

03-27-2008, 08:17 PM	#5 (permalink)
AlexH Active Member Join Date: Feb 2008 Posts: 111	and so you know the frame is off and it is still stuck. rock solid.

03-27-2008, 08:40 PM	#7 (permalink)
AlexH Active Member Join Date: Feb 2008 Posts: 111	ill try that but from the fron of the gun since the valve and stuff is out.

03-27-2008, 08:46 PM	#9 (permalink)
AlexH Active Member Join Date: Feb 2008 Posts: 111	it took a dowel rod and a hammer but i got it unstuck and i didnt even break anything

03-28-2008, 04:53 PM	#10 (permalink)
Jordan Angel for sale Join Date: Jul 2006 Location: Vineland, Ontario Posts: 897	If the valve was out and you were cocking back the hammer and pulling the trigger, you may have jammed the hammer into the valve nut threads - pray to Velcor that you didn't screw those threads up. NEVER do that. It's a good way to destroy a body. Jordan __________________ *POG Member #952* Currently owned: Hurriphoon #P1710 My Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search