Cocker help

stircrazzzy · 04-25-2008, 05:45 PM

Ok, I've got a halfblock with an e2 and mq2 valve. I have no problem getting the pneus to cycle properly, but I can't get the gun to fire. I can hear the poppet valve making little "pop" sounds that are barely audible, all the while the air is hissing throughout the gun. Is the valve not seating properly?

I have it set to factory fast, eyes off, coff 6 or whatever it was that was recommended on kajohnson.com.

I'd appreciate any help with this, I want to start playing!

I've messed with the input pressure. I have an aka 2liter on there, and I've gone from no gas getting into the gun to wayyyy to much going in there, pulling the trigger repeatedly the whole time. I know where it wants to be, because I can hear the poppet valve trying to operate. Why would it not be sealing? I can't see in there...do I need to lube something?

I'm almost to the point where I wouldn't mind paying someone to fix it

Thanks guys.

IKILLFORNR · 05-04-2008, 12:23 PM

Your timing is too fast if its not actually firing but cycling. Try decreasing your timing.

hmcl281 · 05-11-2008, 03:51 AM

is your battery good
is the valve plug into the right slot
r u able to measure your input pressure
?

04-25-2008, 05:45 PM	#1 (permalink)
stircrazzzy MCB Member Join Date: Nov 2007 Posts: 175	Cocker help Ok, I've got a halfblock with an e2 and mq2 valve. I have no problem getting the pneus to cycle properly, but I can't get the gun to fire. I can hear the poppet valve making little "pop" sounds that are barely audible, all the while the air is hissing throughout the gun. Is the valve not seating properly? I have it set to factory fast, eyes off, coff 6 or whatever it was that was recommended on kajohnson.com. I'd appreciate any help with this, I want to start playing! I've messed with the input pressure. I have an aka 2liter on there, and I've gone from no gas getting into the gun to wayyyy to much going in there, pulling the trigger repeatedly the whole time. I know where it wants to be, because I can hear the poppet valve trying to operate. Why would it not be sealing? I can't see in there...do I need to lube something? I'm almost to the point where I wouldn't mind paying someone to fix it Thanks guys.

05-04-2008, 12:23 PM	#2 (permalink)
IKILLFORNR Newbie Join Date: May 2008 Posts: 11	Your timing is too fast if its not actually firing but cycling. Try decreasing your timing. __________________ Official Etek Owners Group Old Trust +3/-0 ~Official March EOTM~

05-11-2008, 03:51 AM	#3 (permalink)
hmcl281 Active Member Join Date: Aug 2007 Posts: 187	is your battery good is the valve plug into the right slot r u able to measure your input pressure ? __________________ 04-10-08 for sale items massive autococker parts: halfblocked bodies and bolt sled and pin eye zero board e2 frame manifold regulator asa on/off eclipse ram and lpr samurai trigger

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search