Autococker Velocity Problem

BigTrucker · 04-29-2008, 11:58 PM

Okay i have an older Autococker and i have a velocity problem. I can not get it to go above 245. Do i need new springs?? This cocker has just been timed by palmer's. The PPS Stabilizer is set at about 400 witch i think is right for a cocker.

sdawg · 04-30-2008, 08:52 AM

Try raising the pressure, if you can.

Older cockers were designed to run on unregulated CO2, so they need 650+ psi

BigTrucker · 04-30-2008, 11:34 PM

I'll give it a try.

04-29-2008, 11:58 PM	#1 (permalink)
BigTrucker Newbie Join Date: Mar 2008 Posts: 26	Autococker Velocity Problem Okay i have an older Autococker and i have a velocity problem. I can not get it to go above 245. Do i need new springs?? This cocker has just been timed by palmer's. The PPS Stabilizer is set at about 400 witch i think is right for a cocker.

04-30-2008, 08:52 AM	#2 (permalink)
sdawg MCB Member Join Date: Dec 2006 Location: Texas Posts: 1,406	Try raising the pressure, if you can. Older cockers were designed to run on unregulated CO2, so they need 650+ psi __________________ Everybody: Let's ease up on the red loctite, 'kay? Thanks. Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-30-2008, 11:34 PM	#3 (permalink)
BigTrucker Newbie Join Date: Mar 2008 Posts: 26	I'll give it a try.