E2 with MQ valve help

hvacman250 · 05-31-2008, 08:52 PM

Gun has an MQ valve plugged into the SEAR slot in the board. Gun cycles, but no air form the MQ/valve.

If I reverse the SEAR and COCK terminals, the MQ chuffs, so I know the MQ is good. Put the MQ onthe SEAR terminal, it makes no noise or effort to shoot.

I went thru the board settings and Sear is at 4.0 ms. Are there any changes in the board I need to make?

I know Snipers, and I know MQs, but not Eframes

hawaiianking · 06-10-2008, 03:18 AM

try testing the board with the original eblade sear solenoid. if the sear solenoid works its the MQ, if not then its the board.

drg · 06-10-2008, 05:06 AM

Eyes on or off? Try lowering CTO to its lowest setting, sometimes it seems like nothing is happening but it's really in eye timeout.

Waiiit ... is this a pump or semi?

stircrazzzy · 06-10-2008, 03:51 PM

It's a semi. Trust me

hvacman250 · 06-10-2008, 05:55 PM

Quote:

Originally Posted by drg

Eyes on or off? Try lowering CTO to its lowest setting, sometimes it seems like nothing is happening but it's really in eye timeout.

Waiiit ... is this a pump or semi?

Eyes off. Ill look for a CTO function.

I dont have the blade sear, its a customers gun.

drg · 06-10-2008, 09:41 PM

Well the CTO thing doesn't really apply if you've already turned the eyes off ... sounds suspiciously like a board issue, can you meter the pins or probe the mQ wires?

stircrazzzy · 06-13-2008, 06:05 PM

Any luck?

05-31-2008, 08:52 PM	#1 (permalink)
hvacman250 www.pbpumpshop.com Join Date: Nov 2006 Posts: 831	E2 with MQ valve help Gun has an MQ valve plugged into the SEAR slot in the board. Gun cycles, but no air form the MQ/valve. If I reverse the SEAR and COCK terminals, the MQ chuffs, so I know the MQ is good. Put the MQ onthe SEAR terminal, it makes no noise or effort to shoot. I went thru the board settings and Sear is at 4.0 ms. Are there any changes in the board I need to make? I know Snipers, and I know MQs, but not Eframes __________________ Feedback

06-10-2008, 05:06 AM	#3 (permalink)
drg Post Whore Join Date: Mar 2007 Posts: 1,361	Eyes on or off? Try lowering CTO to its lowest setting, sometimes it seems like nothing is happening but it's really in eye timeout. Waiiit ... is this a pump or semi? __________________ My feedback: PBN Old-New / AO / CC / MCB Halfcocker.com - The site for all things halfblock/midblock cocker HawaiiPB.com - Paintball forums for the state of Hawaii

06-10-2008, 09:41 PM	#6 (permalink)
drg Post Whore Join Date: Mar 2007 Posts: 1,361	Well the CTO thing doesn't really apply if you've already turned the eyes off ... sounds suspiciously like a board issue, can you meter the pins or probe the mQ wires? __________________ My feedback: PBN Old-New / AO / CC / MCB Halfcocker.com - The site for all things halfblock/midblock cocker HawaiiPB.com - Paintball forums for the state of Hawaii

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-10-2008, 03:18 AM	#2 (permalink)
hawaiianking Newbie Join Date: Mar 2007 Location: Honolulu, Hawaii Posts: 25	try testing the board with the original eblade sear solenoid. if the sear solenoid works its the MQ, if not then its the board.

06-10-2008, 03:51 PM	#4 (permalink)
stircrazzzy MCB Member Join Date: Nov 2007 Posts: 175	It's a semi. Trust me

06-13-2008, 06:05 PM	#7 (permalink)
stircrazzzy MCB Member Join Date: Nov 2007 Posts: 175	Any luck?