Another "ID this 'cocker" thread...

Redbeard the Pirate · 07-01-2008, 10:15 PM

So this is my first autococker, I just picked it up of craigslist from guy who's had it in his garage for 7+ years! I took it apart, lubed it up, and somehow it worked when I fired it lol.

Anyway, It has 23283 stamped right above the regulator, and it came with an expansion chamber that was gigantic! It also has a palmers... thing... whatever the thing is next to the 3 way valve.

Anyway, he says he bought it new in '98, and he's done a couple upgrades to it, but honestly I had no idea what he was talking about (something about opening up the bolt to make it lower pressure?)

Marauder_Pilot · 07-01-2008, 10:23 PM

Looks like a basic '98 RF 'Cocker with a Dye Eyzon (sp?) site, stock pneumatics and beavertail, old-style swing frame and AGD rubbers.

sable · 07-01-2008, 10:23 PM

that appears to be yeur good old standard wgb body. with what appears to be an older stab and rock.

nice find.

sable · 07-01-2008, 10:24 PM

Quote:

Originally Posted by Marauder_Pilot

Looks like a basic '98 RF 'Cocker with a Dye Eyzon (sp?) site, stock pneumatics and beavertail, old-style swing frame and AGD rubbers.

i think the sight is an armson pro-dot actually.

sorry for double post.

Redbeard the Pirate · 07-01-2008, 10:30 PM

Yup, armson sight...

Anyway, is this thing worth anything? I actually got it because he was selling this and a RH gravity feed phantom for $175. Even a guess would be helpful...

Fubarius · 07-01-2008, 10:32 PM

Quote:

Originally Posted by Marauder_Pilot

Looks like a basic '98 RF 'Cocker with a Dye Eyzon (sp?) site, stock pneumatics and beavertail, old-style swing frame and AGD rubbers.

Square edges on the sight rail make is pre-98. The sight is an Armson OEG. The pneumatics aren't stock, deffinatly a Palmer's full size Rock and an aftermarket micro ram. The beavertail is also aftermarket, the stock is square on the top of the back. The frame is a stock slider, probably metal from that era. And I'm pretty sure AGD rubbers were all flat on the bottom, not angled up on the bottom like those.

MaD · 07-01-2008, 10:53 PM

The grips are PMI.. you can almost read it from the right side pic. Honestly the shape looks like sheridan grips. From the dating guide, the body is a 95. Many of the other parts are newer than that though.

Altec · 07-01-2008, 10:55 PM

Thats one heck of a feedneck! Must be good for shakers!

Grendel · 07-01-2008, 11:02 PM

From Thumper's Autococker Dating List your serial # 23283 is from 1995 [17,000's - 28,000's = 1995]. This is the best collection of serial# to dates list I've seen.

Redbeard the Pirate · 07-01-2008, 11:05 PM

Quote:

Originally Posted by Altec

Thats one heck of a feedneck! Must be good for shakers!

Yeah, it's got some sort of extender on it, I'm fairly certain it's removable, but I haven't tried yet, I think he did it so he could stick something in there for a ball stop.

Quote:

Originally Posted by Grendel

From Thumper's Autococker Dating List your serial # 23283 is from 1995 [17,000's - 28,000's = 1995]. This is the best collection of serial# to dates list I've seen.

Wow... so it's flippin old lol, thanks Grendel!

07-01-2008, 10:15 PM	#1 (permalink)
Redbeard the Pirate MCB Member Join Date: Feb 2008 Posts: 191	Another "ID this 'cocker" thread... So this is my first autococker, I just picked it up of craigslist from guy who's had it in his garage for 7+ years! I took it apart, lubed it up, and somehow it worked when I fired it lol. Anyway, It has 23283 stamped right above the regulator, and it came with an expansion chamber that was gigantic! It also has a palmers... thing... whatever the thing is next to the 3 way valve. Anyway, he says he bought it new in '98, and he's done a couple upgrades to it, but honestly I had no idea what he was talking about (something about opening up the bolt to make it lower pressure?) __________________ My Feedback: Specops: +11/-0 MCB: +9/-0 AO: +9/-0 Ebay: +54/-0

07-01-2008, 10:30 PM	#5 (permalink)
Redbeard the Pirate MCB Member Join Date: Feb 2008 Posts: 191	Yup, armson sight... Anyway, is this thing worth anything? I actually got it because he was selling this and a RH gravity feed phantom for $175. Even a guess would be helpful... __________________ My Feedback: Specops: +11/-0 MCB: +9/-0 AO: +9/-0 Ebay: +54/-0

07-01-2008, 10:53 PM	#7 (permalink)
MaD MCB Member Join Date: Oct 2007 Location: Michigan Posts: 674	The grips are PMI.. you can almost read it from the right side pic. Honestly the shape looks like sheridan grips. From the dating guide, the body is a 95. Many of the other parts are newer than that though. __________________ -= MaD =- Like DIY projects and crazy scenario gear? Visit us! www.freepaintballplans.com

07-01-2008, 10:55 PM	#8 (permalink)
Altec Seasoned Member Join Date: Oct 2006 Location: Maryland Posts: 537	Thats one heck of a feedneck! Must be good for shakers! __________________ PROJECT'S Confederate Ballers! -Official Avatar Maker-

07-01-2008, 11:02 PM	#9 (permalink)
Grendel Has Been :) Join Date: Apr 2006 Location: Lexington, SC Posts: 637	From Thumper's Autococker Dating List your serial # 23283 is from 1995 [17,000's - 28,000's = 1995]. This is the best collection of serial# to dates list I've seen. __________________ "Rather fail with honor than succeed by fraud." -Sophocles My Pyre #PY008 RF Oak Grendel's Feedback on MCB

07-01-2008, 10:23 PM	#3 (permalink)
sable Banned Join Date: Jan 2008 Location: Houston, TX Posts: 567	that appears to be yeur good old standard wgb body. with what appears to be an older stab and rock. nice find.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search