|What Is It? Even after cleaning off the dust.... Still don't know what you have? Let the knowledgeable old-timers help you out|
| ||Thread Tools||Search this Thread|
|12-17-2010, 09:58 AM||#1 (permalink)|
Join Date: Jan 2010
Identify this Old Custom Cocker....
Guys, I bought this a while back and can't find any info about it.
Parts on it/inside (not that it makes a difference in the make/model)
Slider with set screws (2 hole asa setup)
Heavy hammer with nyloc screws
Non threaded IVG
Rare left feed
1 of the smoothest shooters I have amongst my freeflows and evos
Some say freeflow fulcrum, but I don't think so.
Some say old BBT, but don't know for sure.
Some say Evo, but I am 99.7% sure it isn't.
Hoping some old timers around here would know.
Pic of right side for now as I don't have left side on my comp. Left side is exactly the same milling without the detent and its left feed.
|12-17-2010, 11:27 AM||#2 (permalink)|
Ki he malohi!
Join Date: Oct 2008
Location: Abq NM
I had an old Palmer autococker that kind of looked like that one.
Ko 'e Otua, mo 'e mo'ui, mo 'e ngaahi kau me'a
|12-18-2010, 12:29 AM||#4 (permalink)|
Join Date: Sep 2006
Belsales...check the milling against:
belsalesgallery / Polaroid v 1.2 / Picasa template from www.paulvanroekel.nl
Look at 99evo3.jpg...and some of the others. That rear-in line cut was one of their early distinguishing marks.
|12-19-2010, 01:28 PM||#6 (permalink)|
Join Date: Sep 2006
Perhaps email Belsales? I'm sure they'd recognize their work.
|12-19-2010, 04:15 PM||#8 (permalink)|
Join Date: Dec 2006
here is my left feed evo. I cant remember the serial number off the top of my head but its 21XXX so its earlier than the marker in question (94 or 95). It has evo milled on the back and the milling on the top tube doesn't go as far forward as the marker in question. It could be a one off gun converted by Belsales for a customer?? My guess its a one off custom job someone had done back in the day but most likely not a belsales gun
LF94Evolution CustomFreeflowFulcrum RF94BradNestle CamoEclipseMag RF98Sniper CamoSmartmag IronmanDyeLCD ElectricSkysEclipseLED FoldaMagicF1
Last edited by howdy; 12-19-2010 at 04:20 PM.
|12-19-2010, 05:44 PM||#10 (permalink)|
my mini evo didnt have the evo name milled into it
"Speak softly and carry a big stick, if that don't work, start yellin' and grab a shotgun"-Bill engvall.
|Thread Tools||Search this Thread|