Freeflow (?) RF pre-2k cocker question
This came to me by way of a friend. He said he though it was a Freeflow from way back in the day.
Valve has an o-ring on the stem that looks like its designed to reduce air leakage into the hammer train. Hammer has 2 nylon set screws, one for hammer lug, other for cocking rod. Cocking rod is also unusual, as you can see. has one side set screw, rod appears to travel completely through the nut. Barrel I also haven't seen before. It doesn't wanna come apart. I'd estimate bore at .687 or so based on the paint I have here. The rear bore is tighter than the forward bore. When it came to me, it had a set screw blocking off the front block air passage (Sniper 3 conversion?). Frame is a composite frame. Bolt is an SS, dual o-ring, venturi (looks the same as the STO bolts).
Any help with ID/price point would be appreciated.
It is a Freeflow. A Fulcrum body. The barrel is a Smart Parts All American. It's 2 piece but it's glued not threaded. They're not meant to come apart.
I would say $150 or so as it sits IMHO.
I second all that Millar156 said. It is a Freeflow Fulcrum. It's a shame it's missing many of the original parts. I had one of these (even the same red color, I hope this isn't it) and the original frame and trigger were super smooth.
Yeah, I'm sorry for the poor girl. My buddy won it playing for "pinks" out on the west coast... barbarians. Lol.
|All times are GMT -4. The time now is 05:38 PM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC