|WTB Want to Buy!! The object you desire may just be a post away. Just ask!|
| ||Thread Tools||Search this Thread|
|11-25-2012, 04:38 PM||#2 (permalink)|
Join Date: Oct 2007
P68's came with CA. P12's and PMI 1 DF's were 12 gram.
there are several options:
drop in front plug with a hose running back to the bottle,
dummy 12 gram and drill a hole in the side of the lower tube to connect the line,
drill and tap the chamber wall directly then solder an 1/8 npt elbow in place,
trade or sell your gun for one set up for CA already.
Here are some of my projects:
Armed Forces Trainer improved rear sight
Dukie lever gun + wood & brass
007-brass-phantom-feed , A little nelly 007 love , 007 piercing pin substitute
Zeus mods , P68SC Remmington 870
KP wood before and after , Wood for an SMG 60 RamBolt MQ Cocker , AT85 boxmag
A5 Bullpup dual grip ,
My feedback , Proud supporter of Fox Paintball of IL
|11-25-2012, 04:48 PM||#3 (permalink)|
Join Date: Jun 2008
Location: looking through the knotholes in granny's wooden leg
I think he is talking about a p68sc.
What Smiley said is correct, although short and to the point. Those are the ways to make it a CA gun.
The drop in front plug he refers to is a constant air adapter that goes instead of a 12g and the stock rod and cap. There are a few for sale here on this forum as we speak.
Dummy 12g, well it is what it sounds like, many for sale on ebay and other paintball web pages. will need to drill a hole in the bottom tube to attach the air line to the dummy 12g.
Tap the valve, Many examples of this in the Sheridan picture thread.
Which ever you chose you will need to mount a tank somewhere, the stock sheridan frame is not bottom asa friendly. If you want to keep the stock frame you will need a UMB which are often for sale on here or 360 days a year a Palmers.
4 out of 5 voices in my head say i'm ok
Stuff I want or need evenually
want to buy red pump handle
Nelson, Tippmann, Dye, Angle, Spyder stuff
|Thread Tools||Search this Thread|