|WTB Want to Buy!! The object you desire may just be a post away. Just ask!|
| ||Thread Tools||Search this Thread|
|10-12-2006, 02:24 PM||#2 (permalink)|
Join Date: Apr 2006
Location: Southern Indiana
I believe I have one that I got for a bull barrel on my sniper II. I don't use it anymore. It was a NOS TASO brake. Shoot me an email or PM if you're interested.
Bleeding Paint and Sweating CO2 since 1988!
|10-12-2006, 03:58 PM||#5 (permalink)|
Join Date: Sep 2006
It would replace the sleeve on the OD of the actual nelspot barrel and held in place with 2 set screws. The original piece is apx. 1 5/8" long but doesn't extend past the end of the barrel. What I'm looking for would then be at least 3.25" (preferably).
I'll check through your listings to be sure. Thanks for the reply!!!
|10-12-2006, 05:06 PM||#8 (permalink)|
Retired from paintball
What I have looks like Bacci's 398, with the brass screw to hold it on and double as the front sight pin. I've got a few of them laying around, last I saw.
|Thread Tools||Search this Thread|