Nelspot 007 parts etc

Reaper_de_Grim · 01-14-2007, 12:10 AM

Looking for anywhere to get parts for the Nelspot 007. Nelspot has some parts but they are less than helpful when you call them. Any help is appreciated.

Thanks

Layman · 01-14-2007, 12:46 AM

What parts? Some are flat out not available anymore.

TouchofGrey · 01-14-2007, 10:46 AM

If you see anything in this picture that you need let me know. Perhaps I can part with a few parts.

Reaper_de_Grim · 01-14-2007, 07:48 PM

I got the following list of sources for some parts in an article from Gunslingers paintball. The hard part is getting their tech guys to verify which part works.

http://www.stockclasspaintball.com/a...s/007faq.shtml

BOLTS and HAMMERS

Stainless stock design (Numerous)

Adjustable bolt, stainless, non-anti-kink (Numerous)

Adjustable anti-kink, stainless (Numerous)

LAPCO Ultralight Hammer. 34 grm.. , 40.grm.., 50 grm.. Bore or breech drop.

Bore drop Adjustable bolt, stainless. Must use with after market bore drop receiver (Numerous)

POWER TUBES

LAPCO Jet Set (triple ported tube, aluminum valve seat, lifetime cup seal) #4 , #6

Power tube dual port (Nelson, others) Stainless or steel. #1s -2 -1,00,0(stock),1,2,3,4,5,6

Jet Shaft (triple port, alum. seat, nylon/stainless cup seal)

SPRING KITS

4 main, 4 valve (CMI, Straight Shot, others)

01-14-2007, 12:10 AM	#1 (permalink)
Reaper_de_Grim Rec Poster Join Date: Jan 2007 Location: SC	Nelspot 007 parts etc Looking for anywhere to get parts for the Nelspot 007. Nelspot has some parts but they are less than helpful when you call them. Any help is appreciated. Thanks __________________ Call sign: Reaper Captain, Palmetto SwampCats Shooting folks in the back since 1984 "Thats the way we did it back in my day, and since I'm still alive, its still my day."

01-14-2007, 12:46 AM	#2 (permalink)
Layman Active Member Join Date: Apr 2006 Location: Durham, NC	What parts? Some are flat out not available anymore. __________________ It's bad when you use a 12v Revvy to load your 10 round tubes...

01-14-2007, 10:46 AM	#3 (permalink)
TouchofGrey Active Member Join Date: Apr 2006 Location: S. Windsor, CT	Let us know what you want If you see anything in this picture that you need let me know. Perhaps I can part with a few parts. __________________ http://img.photobucket.com/albums/v4...l/DSCF0361.jpg "...remember what the dormouse said. Feed your head..."

01-14-2007, 07:48 PM	#4 (permalink)
Reaper_de_Grim Rec Poster Join Date: Jan 2007 Location: SC	some suppliers I got the following list of sources for some parts in an article from Gunslingers paintball. The hard part is getting their tech guys to verify which part works. http://www.stockclasspaintball.com/a...s/007faq.shtml BOLTS and HAMMERS Stainless stock design (Numerous) Adjustable bolt, stainless, non-anti-kink (Numerous) Adjustable anti-kink, stainless (Numerous) LAPCO Ultralight Hammer. 34 grm.. , 40.grm.., 50 grm.. Bore or breech drop. Bore drop Adjustable bolt, stainless. Must use with after market bore drop receiver (Numerous) POWER TUBES LAPCO Jet Set (triple ported tube, aluminum valve seat, lifetime cup seal) #4 , #6 Power tube dual port (Nelson, others) Stainless or steel. #1s -2 -1,00,0(stock),1,2,3,4,5,6 Jet Shaft (triple port, alum. seat, nylon/stainless cup seal) SPRING KITS 4 main, 4 valve (CMI, Straight Shot, others) __________________ Call sign: Reaper Captain, Palmetto SwampCats Shooting folks in the back since 1984 "Thats the way we did it back in my day, and since I'm still alive, its still my day."

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search