DYE DM3 Matrix Eye Sets - DIY pre-crimped kits, complete assemblies
OEM Gen-E eye sets. They come pre-crimped from factory in the correct configuration, they just need the diodes soldered. You get a complete set with a receiver and an emitter diode, and 4 pcs. of heat shrink tubing for the joints. The connector comes pre-crimped in the correct configuration with the two signature ground connections doubled in the same port, etc. and I have the OEM diagram so that you can connect the correct cables to the correct sides of the diodes (courtesy of Paul @ Cousin's former Gen-E)
$15 + $3.00 shipping /ea, I offer combined shipping for multiple sets
Feel free to contact me with any questions,
e-mail me at tmc_matrix_center@outlook.com for faster response
Thanks for looking
OEM Gen-E eye sets. They come pre-crimped from factory in the correct configuration, they just need the diodes soldered. You get a complete set with a receiver and an emitter diode, and 4 pcs. of heat shrink tubing for the joints. The connector comes pre-crimped in the correct configuration with the two signature ground connections doubled in the same port, etc. and I have the OEM diagram so that you can connect the correct cables to the correct sides of the diodes (courtesy of Paul @ Cousin's former Gen-E)
$15 + $3.00 shipping /ea, I offer combined shipping for multiple sets
Feel free to contact me with any questions,
e-mail me at tmc_matrix_center@outlook.com for faster response
Thanks for looking