Kraken by Killshot Kustoms ~2017 ~80 piece run - $1700 Shipped
Full size Merlin Spec marker. This one was part of my keepers list but I am selling it. I have a bunch of Full Body Merlins and my fingers are narrow for this frame (got those slender piano hands). It shoots awesome but it just gets less use than my other Merlins.
Excellent shape, wear on the barrel. Otherwise very minor wear.
Bob Long Frame
AKA internals
DYE Barrel, freak bored. (-$50 if not needed)
Shocktech STR - Red Acid - $1200 Shipped
Really nice, excellent anodizing and milling. Really a great gun.
Includes a set of inserts in case.
Emek - HDE Earth sponge and splash - $ 700 Shipped
This is from the original run done by Blizzard. Very interesting splash and sponge anodizing. I don't know that it particularly looks like HDE Earth but that's what it was called so 🤷♂️. Sort of a green with a copper sponge and bright penny splash.
685 Back with Threaded Stella front
Fang and Secret Pin with FL Valve
POPS ASA
Etha 3M - Tri-tone Sponge and Splash Polished New - 1000 Shipped
Lots of matching parts and a beautiful ano job.
Fang, EZPZ, PWR (.685 insert), Secret Pin
FLE SCOUT EMEK Midnight - $625 Shipped New
Very minor blem on the feedneck so price reduced a bit. This is a thin ano spot that probably doesn't need to be mentioned, but there you go.
Fang Trigger
POPS ASA
Secret Pin in FL3 Valve
Shaft 4
Bill Macke LF Reverse autococker - $450 Shipped
Bill Macke worked for Constant Action Paintball in Austin Texas. He developed some of the earliest successful low pressure autocockers using his "Constant Flow" system. These used enlarged valve chambers, custom ported front blocks and large banjo bolts. They also featured enlarged air transfer ports. AKA bolts and valves were a common feature.
Bill also made a few reversed pneumatic autocockers, like this one.
This AC came with a WGP valve and hammer installed. It was replaced with the Inception valve (very similar to the AKA, I don't recall what hammer I used specifically but something aftermarket). The trigger is smooth and even. An excellent low pressure shooter.
There are some idiosyncrasies with this autococker. The milling is quite deep and exposes a little of the IVG threading. The ASA seals with a flat oring between the HPR and body. Neither of these affect performance, but are certainly worth mentioning. The timing rod has a bend in it to accommodate the 3-way position. There are some marks here and there. This is a relatively rare and unique autococker and one that shoots great. I had initially intended to keep this one, but left feed just isn't for me.
2018 Freeflow Millennium - $1000 Shipped Red and Gray Splash
Freak Milled DYE Back.
Mix of FF and ST parts
This autococker has been worked on by Docfire and had Shocktech parts installed. Believe the lower tube is all ST, Ram is ST.
Frame has a ST trigger plate. Nice trigger work on this one. Different than I do, but excellent work for sure. Feels like a round lug. Really nice anodizing, smooth and deep.
Dirk Gadberry? Custom WGP Minicocker - $1000 Shipped
This is a pretty interesting new build, on a WGP factory mini-cocker base. Serial number 3943. I believe this to be a Pre-2K minicocker that has been customized.
It has been drilled to 2k spec, including banjo and IVG threading. The feedneck has been modified into a clamp that takes Shocktech rings. Drilled for detents on both side. The 2K modifications were done by Angry Antle.
This body is P-Blocked with a custom bolt. The length is non-standard, similar to the Works bolts. This bolt is delrin with no o-rings and is beautifully fitted to the body. Very high flowing bolt with an angled inlet. The bolt was made by Chris Nelson.
The modernized/feedneck portions are not anodized, but the p-blocking and rail are anodized.
Shoots easily at 300PSI. Incredibly smooth and just delightful to shoot. I am currently investigating who did the original body, but am not certain. If you do have info on this body, please let me know. Likely a Dirk Gadberry but not confirmed.
Truly a custom piece of work fitted with:
Inception PWR Barrel with choice of insert.
CCM style lowers from ACP
Inception Rip Frame
Inception HPR
Inception ON/Off
Shocktech Ram, ID 3-way, PPS LPR, Lapco flush banjo
LNT (Late Night Tooling) Ridgeback Hoseless Autococker $1000 shipped - Anodizing by Outlaw Anodizing - New build, used bolt, anodized pneumatics
Green Acid with Splash
Super low pressure build, very quiet. Originally built by another maker but never used. They did not care for the feel and I purchased it and rebuilt it to my preferences. Never played with but shoots great.
STO/ST Pneumatics
Belsales Bolt
Freak Insert Stella with .689 front
Inception Lower Tube
RKJ Tribute Minicocker - $1000 Shipped
Used- Just took this all apart to respring and tune, new valve, medium heavy hammer. Nice light action now. Runs 300-350 PSI.
Freaked back with DYE tip
ANS Frame
ST 3-way
AKA Reg
FF Ram
Comment