Automag - ULE, Level 10, RT Retro Valve + lots of extra bits
AutoMAG IS SOLD
ULE Automag with level 10 and RT Valve. Just pulled out of storage, after about 6 years, added some oil into the ASA and it appears to shoot fine after a round of 20-40 shots. It needs a replacement bumper, the current one is "sticky". I have left it on, for now, but you should assume that you need a new one ASAP.
Level 10 is tuned, and will not chop, finger in the breach is safe.
ULE body has been cut down(by previous owner) at the front to remove the curve. Takes normal cocker barrels. I will include a barrel with this of unknown original.
RT isn't noticeable with "normal" HPA tanks, but when I ran this with a Ninja SHP setup, it was a lot of fun. The gun is perfectly happy with normal pressure HPA, you just don't get the RT return on the trigger.
Also includes two plano boxes with "bits". Angled ASA, foregrip, foregrip extender, extra sear, ANS valve body, couple extra bolts, 4 bolt springs, and level 10 tuning bits, look at the pictures.
This is a players gun, not a wall hanger. I have not used it in awhile, and it needs to move to someone who wants it.
Asking $500 Shipped in the US, international we can figure it out. Feel free to make an offer if you feel this is out of line. If you wish to trade something, I am possibly interested in an Etek5, or possibly a cocker based pump. Feel free to message.
I have some odds and ends for sale in the MISC section that I can bundle up if you want, gallery here.
ULE Automag with level 10 and RT Valve. Just pulled out of storage, after about 6 years, added some oil into the ASA and it appears to shoot fine after a round of 20-40 shots. It needs a replacement bumper, the current one is "sticky". I have left it on, for now, but you should assume that you need a new one ASAP.
Level 10 is tuned, and will not chop, finger in the breach is safe.
ULE body has been cut down(by previous owner) at the front to remove the curve. Takes normal cocker barrels. I will include a barrel with this of unknown original.
RT isn't noticeable with "normal" HPA tanks, but when I ran this with a Ninja SHP setup, it was a lot of fun. The gun is perfectly happy with normal pressure HPA, you just don't get the RT return on the trigger.
Also includes two plano boxes with "bits". Angled ASA, foregrip, foregrip extender, extra sear, ANS valve body, couple extra bolts, 4 bolt springs, and level 10 tuning bits, look at the pictures.
This is a players gun, not a wall hanger. I have not used it in awhile, and it needs to move to someone who wants it.
Asking $500 Shipped in the US, international we can figure it out. Feel free to make an offer if you feel this is out of line. If you wish to trade something, I am possibly interested in an Etek5, or possibly a cocker based pump. Feel free to message.
I have some odds and ends for sale in the MISC section that I can bundle up if you want, gallery here.
Attached Files
Comment