This is an oldie but a truly great performer and very classy. Not sure of the year since there is no complete serial number (starts with a 1 and is hand stamped). I would guess roughly 94-95 but feel free to elucidate me if you know for sure. This is shooting great at around 375-400psi. Quiet and accurate, velocity can be adjusted through the regulator.
Options include:
A valve of unknown origin (nothing fancy just a nice air pocket on the stem)
Freeflow or similar locking lug hammer
Revenge/Merlin style IVG
Body is milled for Lug adjustment and lock adjustment
Body is milled for F1 wire detents
Body is mini'd (not anodized under front block)
Pneumatics are Shocktech, WGP, and Clippard (pretty sure on the ram, not labeled)
HPR is a Macdev Gladiator
Frame is a composite, sear is a Belsales roller sear.
Barrel is a freak bored LAPCO STAINLESS Bigshot.
When this body was mini'd the threads went too deep (I didn't do it, put down the torches) and cut into the front frame screw just a tad. Small amount of sealant and this is a non-issue, but this should be mentioned.
$600 shipped
Options include:
A valve of unknown origin (nothing fancy just a nice air pocket on the stem)
Freeflow or similar locking lug hammer
Revenge/Merlin style IVG
Body is milled for Lug adjustment and lock adjustment
Body is milled for F1 wire detents
Body is mini'd (not anodized under front block)
Pneumatics are Shocktech, WGP, and Clippard (pretty sure on the ram, not labeled)
HPR is a Macdev Gladiator
Frame is a composite, sear is a Belsales roller sear.
Barrel is a freak bored LAPCO STAINLESS Bigshot.
When this body was mini'd the threads went too deep (I didn't do it, put down the torches) and cut into the front frame screw just a tad. Small amount of sealant and this is a non-issue, but this should be mentioned.
$600 shipped
GLWS
Comment