DYE DM3 Matrix Eye Sets - DIY pre-crimped, complete assemblies

[the_matrix_guy]

DYE DM3 Matrix Eye Sets - DIY pre-crimped kits, complete assemblies

OEM Gen-E eye sets. They come pre-crimped from factory in the correct configuration, they just need the diodes soldered. You get a complete set with a receiver and an emitter diode, and 4 pcs. of heat shrink tubing for the joints. The connector comes pre-crimped in the correct configuration with the two signature ground connections doubled in the same port, etc. and I have the OEM diagram so that you can connect the correct cables to the correct sides of the diodes (courtesy of Paul @ Cousin's former Gen-E)

$20 + $3.00 shipping /ea, I offer combined shipping for multiple sets







Feel free to contact me with any questions,

e-mail me at tmc_matrix_center@outlook.com for faster response

Thanks for looking

[the_matrix_guy]

I also have OEM NYX-DM7 pre-crimped connections with the 3 (red-white-black) wires, but you'll have to figure out how to split one of the cables to complete it accordingly. Some of them vary on which cable you're supposed to split off. The DM3 connections were different, the connector itself is different, and all four wires are crimped and run directly from the connector itself.