Superman Black Friday Part Two

[superman]

I figured i would go ahead and make another thread for the stuff i did not already list in this thread...

https://www.mcarterbrown.com/forum/b...ale#post628338

This thread will likely be more focused on cocker parts.




Meteor G series autococker body kit $700







Orracle body kit (Drilled) $300 SOLD
Has some scratches, lowertube is empty. bolt ball detent needs to be replaced, ball no longer moves.
Aftermarket clamping feedneck. If i can get power to my mill before this sells, i can offer to feedneck mod it for an additional cost.







2k4 body, CK lasered, feedneck modded, orracle bolt, rebuildable detent $200





Black Magic $250
Undrilled and clamping feedneck.If i can get power to my mill before this sells, i can offer to feedneck mod it for an additional cost.
body is empty.





Gloss black Orracle body, undrilled clean $300



AIM body, drilled, threads repaired with stainless CCI inserts.
has some wear and a ding in the front wing.
If i can get power to my mill before this sells, i can offer to feedneck mod it for an additional cost.
$200

[superman]

Frames

Trilogy 1.5 frames.
Most have been Tslotted $45



WGP hinge frames
gloss double in better condition $50
Gloss double in more used condition $35
dust black 2k5 frame $45
Chrome hinge $25

[superman]

PE pops with Inception rail $65




Belsales EVO valve and rex dialer kit $120

[superman]

SR autococker bits $45


bolts $20 each shipped.


trilogy lprs $20 each
May need a rebuild, all untested.


trilogy lowertube kits $45
Palmers valve $30
Inception cocking rod with scratches $12
trilogy timing rods $15 ea
trilogy pump rods $15



trilogy rams $35ea
beaver tails $20ea
WGP reg untested $30




CCM internals $100

[superman]

Cases
$30 spyder case, some staining and fading but still kind of cool
$40 Inception cases, 1 dense foam with 2 handles and 1 soft foam with 1 handle.
$30 NXE case.
pics
https://imgur.com/a/jVCYrNN

[superman]

everything you see in the pic $75 ppd shipped.

Was someones project to do a gas thru kit. Happy to take more pics just ask.

[Psycho91]

What all is needed/needs to be done to finish this

[superman]

Not really sure, it wasn’t my project.

[superman]

Jt Flex X $45 out the door.
Small scratches on the lense.
https://imgur.com/a/qbDlFB1



Shocker CVO frame and feedneck
trigger is polished
does not have the valve for the mech
$80

[superman]

Aluminum CCM Pump handle $225
https://imgur.com/a/UMcwuze

[superman]

Tank covers
$10 each for silicone
$20 each for the rest

[superman]

added more

[superman]

Bump

[superman]

Bump. Hoping to find time to add more today.

[superman]

bump

[superman]

Bump

[Tracker]

I'm interested in the Palmer's valve