Announcement

Collapse
No announcement yet.

PTP VMX and Sheridan K Series Project markers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    PTP VMX and Sheridan K Series Project markers

    Hey ya'll.

    Selling some non-functioning markers. Prices are OBO as I can't find much market info on these, if you aren't interested, but have a good market idea, please let me know.

    Pro Team Products VMX: Sold on ebay.

    Doesn't fire or hold air right now. Replaced the orings and valve stem, but still leaks, Quite possible I didn't install the valve correctly or something. Currently has a 3d printed trigger guard and an Armson grip, but will come with stock guard and grip as well.
    Click image for larger version  Name:	PTP VMX.jpg Views:	0 Size:	804.7 KB ID:	14159

    Sheridan K series: SOLD

    This old Sheridan says K series on the side, but looks like it's had some work done. Quick drop out co2, angled feed and a pistol grip instead of a stock. Comes with a tank carrier and 12g to tank adapter. The 12gram seal is missing and I can't find one that fits to replace it with. The frames paint was peeling off badly, so I started to remove it, but never had time to finish or clear coat/repaint. I may start again now that I've been laid off and have time I guess. The bolt seems pretty worn. The remote asa is missing it's valve pin, and has something stuck in the threads, and the hose has a puncture on one side. Honestly both are probably trash, but the tank holder and the 12gram are both fine, and a braided line and remote ASA should be the easiest things to replace if you decided to run it that way.

    Marker and kit:
    Click image for larger version  Name:	Sheridan K Series (2).jpg Views:	0 Size:	1.04 MB ID:	14160

    Remote problem:
    Click image for larger version  Name:	Sheridan K Series (3).jpg Views:	0 Size:	497.8 KB ID:	14157

    Hose problem:
    Click image for larger version  Name:	Sheridan K Series (4).jpg Views:	0 Size:	283.8 KB ID:	14161

    Leftover paint:
    Click image for larger version  Name:	Sheridan K Series (5).jpg Views:	0 Size:	411.4 KB ID:	14158
    Attached Files
    Last edited by kingofskies; 09-17-2020, 06:18 PM.

    #2
    From what I remember, those QuickSilver changers were only ever installed by Palmer's directly unless it was a bootleg job, but with the nickel plating maybe that was done up by PPS back in the day.
    Peculiar Paintball on Youtube

    RuleOfSines Feedback

    Comment


    • Jordan

      Jordan

      commented
      Editing a comment
      The nickel plate might be a Gabriel Tyler job, too, although I believe PPS offered a pistol conversion for the KP rifles.

    • kingofskies
      kingofskies commented
      Editing a comment
      I had asked around in the MCarterBrown facebook group a couple years ago, Palmer confirmed it's likely been to PPS. Something about the length of the bolt and the location of the front frame screw. Value at the time was suggested at $250, but I assumed that was considered working. That said, It shouldn't be much to get it working, I just don't have the time or money to do it right now. Do you think the asking price is fair?

    #3
    kingofskies I think the price is fair, not a fast sell, but good starting point. I'm tempted for a project I have in mind, but I'm trying to reign in my spending a bit.
    Peculiar Paintball on Youtube

    RuleOfSines Feedback

    Comment


      #4
      I don't need this I don't need this I don't need this

      Comment


        #5
        really sucks that that kp2 project is direct feed.... but I'll take it if it's still available

        Comment


          #6
          Replied via pm.

          Comment


            #7
            Sheridan KP2 is sold.

            Comment


              #8
              Still looking to sell the VMX. Price is negotiable.

              Comment


                #9
                VMX Sold on Ebay.

                Comment

                Working...
                X