Announcement

Collapse
No announcement yet.

"Boomstick" Umarex HDS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    "Boomstick" Umarex HDS

    *SOLD*

    This is my Boomstick. Mostly used this as my "I'm running out of paint gun" but it's super fun to play with despite all the quirks. Got it shooting around 265 on a hot day depending on paint size. You get more velocity if you pick a single barrel. Capable of double barrel shots but keep in mind that's the same amount of gas for the 2 shots you'd get in 1 barrel so the velocity will suffer (still possible to use in close quarters, I suppose it depends on how much you like the person)

    This velocity is non adjustable and was achieved by drilling out the plastic restrictor that's in the marker from the factory. Also can be removed but I.think it would shoot too hot to use at a field. The beginning of the barrels has a rubber ring that's sort of a detent but this gun is very paint dependant.

    Including a shotgun skeet shooting bag that's perfect for single loading paintballs, and has loops that fit 10rd tubes or 12 grams, and a barrel bag from a A5 flatline that fits the business end nicely if you wrap the Paracord around knob on the grip.

    There's some wear on the black ano parts I tried to picture.
    $90 shipped to the lower 48
    Last edited by cheapguitarscheapthrills; 06-18-2025, 06:01 AM.

    #2
    Think I can shove first strikes in it?
    90% of my markers go “Psssssssssssss”

    ————————Feedback below————————

    https://www.mcarterbrown.com/forum/b...nhd81-feedback

    Comment


    • Jonnydread

      Jonnydread

      commented
      Editing a comment
      I've done it before, but they're tight. The barrel detents catch the fins a bit.

    • cheapguitarscheapthrills
      cheapguitarscheapthrills commented
      Editing a comment
      I've never tried first strikes but if paintballs are a little tight I push them past the detents. Works most of the time, like I said very paint dependent

    • Chuck E Ducky

      Chuck E Ducky

      commented
      Editing a comment
      Just trim the detents and you absolutely can. You can freak bore them fairly easily as well.

    #3
    Apparently it can shoot first strikes
    https://youtu.be/M9iIRdyF9ws?si=tSXmIhJKfxDL98KD

    Comment


      #4
      They are pretty easy to mod as well. I freak bored mine with dual .681 inserts thing bangs now.
      Attached Files

      Comment


      • Masonhd81

        Masonhd81

        commented
        Editing a comment
        Is that an extended barrel :0

      • Chuck E Ducky

        Chuck E Ducky

        commented
        Editing a comment
        Yup some Amazon carbon fiber tubing I cut in half honed the inside bore a bit on and captured standard freak inserts between the stock breach back and the new barrels. It shoots two at 280fps easily. It’s way more functional now. It’s a lot of fun to play with.

      #5
      Sold!

      Comment

      Working...
      X