Trracer velocity tool and 1" elbow

[wycke]

Anyone have a spare velocity adjuster and/or 1" hopper elbow?

[netsurferdude2]

I am pretty sure I have an elbow or two. You can have them if you want them.

[shooter311]

ANS has the velocity tool for $7

https://www.ansgear.com/Trracer_Velocity_Adjusting_Tool_p/empiretrracervelocityadjuster.htm

[wycke]

ANS has the velocity tool for $7

https://www.ansgear.com/Trracer_Velocity_Adjusting_Tool_p/empiretrracervelocityadjuster.htm

Yeah, and $5 shipping 😡

I was hoping someone had one laying around they'd let go cheap.

[shooter311]

I always just add on 500 paintballs or something to get the free shipping.

[Chaos]

Yeah, and $5 shipping 😡

I was hoping someone had one laying around they'd let go cheap.

Make one... All you need is a long 1/4" Allen wrench and as long a screwdriver that takes bits you can find. Cut the Allen wrench so it's totally straight and glue it into the screwdriver and you're done.

Sent from my SM-A516V using Tapatalk

[Nish]

Wycke, Is this for the Empire Tracer? If so i have one, just send me your address.

[wycke]

Make one... All you need is a long 1/4" Allen wrench and as long a screwdriver that takes bits you can find. Cut the Allen wrench so it's totally straight and glue it into the screwdriver and you're done.

Sent from my SM-A516V using Tapatalk

Harbor freight has a 6" long 1/4" bit holder for $1.99. Three of them should work fine. Plus, I can use the same with a flathead bit for my phantom.

I also think I might actually have of these (the adjuster) somewhere. There's one box I threw some old stuff into that I can't find.

[wycke]

Ok, got the velocity adjuster sorted out, just need a 1" elbow. I guess I could just stick 10 round tubes in there, but would prefer to use a hopper.

[Chaos]

Ok, got the velocity adjuster sorted out, just need a 1" elbow. I guess I could just stick 10 round tubes in there, but would prefer to use a hopper.

Want one of my homebrew PVC stock class feeds?

Sent from my SM-A516V using Tapatalk

[wycke]

Want one of my homebrew PVC stock class feeds?

Sent from my SM-A516V using Tapatalk

Sure! I was thinking of making one myself, but I'm stuck at home for the next 10-12 days so not able to get out to get the parts. I know I had one years ago but must have sold it.