WTB: Shocker Sport Double trigger - Shoebox

[caylegeorge]

Looking for a double trigger for an old school Shocker Sport (shoebox).
This is the kind that is held in place by the 2 pins. (see pics)

I have a super mint shoebox I'm restoring, but it has a single trigger in a double frame :/

Would love to find one of the style shown below, but if you have any kind of double trigger let me know.

Thanks!

Also interested in a shoebox power feed in black, and/or a mint poppet seat and firing cylinder.

[Siress]

DS or LS? DS typically had the front pin acting as a mechanical safety switch. If LS, Impulse triggers should be compatible. The one in your image looks like the NDZ FAT trigger.

Per ZDSPB, you can also modify an LS trigger to work with the DS frame.

[caylegeorge]

Good point, It is an LS with the microswitch.

Thank you for the info - I didnt know the impulse triggers would work - looks like they have a little nub on top that should maybe be filed off?

[Siress]

I don't think the Impulse triggers require modification for the LS frames.

See the note on New Designz website:http://www.newdesignz.com/Impulse.htm

[caylegeorge]

I don't think the Impulse triggers require modification for the LS frames.

See the note on New Designz website:http://www.newdesignz.com/Impulse.htm

Awesome ! Now to find one

[Roger7pball]

Just a note, my trigger felt much smoother with the safety pin removed. No real need with an electrical switch/safety.

[caylegeorge]

Just a note, my trigger felt much smoother with the safety pin removed. No real need with an electrical switch/safety.

Awesome great to know, if I can track one of the NDZ triggers down I'll leave the stop out Seems reasonable with the setscrew on it.

[Tilx]

I might have one, will be home to look through my stuff after work and i'll let you know.

Just for clarity: are you looking for just a blade trigger, or a whole frame?

[caylegeorge]

I might have one, will be home to look through my stuff after work and i'll let you know.

Just for clarity: are you looking for just a blade trigger, or a whole frame?

Just a trigger, thank you for taking a look

[Tilx]

Just a trigger, thank you for taking a look

I didnt get the chance i thought i'd have to look last night, ended up gettinh home a few hours later than expected, apologies. Will look tonight, should be home in 2 hours.

*edit*
home, checked, and i have one. Will post pics in a few minutes if you'd like. Black blade trigger.

[caylegeorge]

I didnt get the chance i thought i'd have to look last night, ended up gettinh home a few hours later than expected, apologies. Will look tonight, should be home in 2 hours.

*edit*
home, checked, and i have one. Will post pics in a few minutes if you'd like. Black blade trigger.

Awesome yes please

[Tilx]

Attempting to remove the set screw is proving difficult, however:

[lew]

Just a note, my trigger felt much smoother with the safety pin removed. No real need with an electrical switch/safety.

I've taken all the rear pins off my Shocker frames that would allow it (an older frame with the angled return spring requires both pins). Massive improvement in the pull, and now I have a bunch of extra clips If I need them.

OP: It's usually cheaper to buy an Impulse frame off of fleabay with an Eclipse or NDZ trigger installed and then just swap it over to the Shocker.